Page 66 / 96
Scroll up to view Page 61 - 65
µµ
D-Link DWL-7100AP User Manual
AP Repeater
Click on
Site Survey
and select the SSID that you
want the AP to repeat or enter the MAC address
manually of the access point you want to repeat.
AP Repeater:
Page 67 / 96
µ7
D-Link DWL-7100AP User Manual
AP Client
Allows you to use the access point as a wireless
client. Click on
Site Survey
and click on the SSID
that you want the AP to connect to, or manually
enter the root AP SSID.
AP Client:
Page 68 / 96
µ¶
D-Link DWL-7100AP User Manual
DHCP Server
Enable or disable the DHCP server function.
Click to enable Dynamic Pool Settings. Configure
the IP address pool in the fields below.
Click to enable Static Pool Settings. Use this function
to assign the same IP address to a device at every
restart. The IP addresses assigned in the Static
Pool list must NOT be in the same IP range as the
Dynamic Pool.
Enter the initial IP address to be assigned by the
DHCP server.
Enter the number of allocated IP addresses.
Enter the subnet mask.
Enter the gateway IP address, typically a router.
WINS (Windows Internet Naming Service) is a
system that determines the IP address of a network
computer with a dynamically assigned IP address,
if applicable.
All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here.
DHCP Server:
Dynamic Pool
Settings:
Static Pool
Settings:
IP Assigned From:
Range of Pool (1~255):
SubMask:
Gateway:
WINS:
DNS:
Domain Name:
Lease Time :
Status:
Enter the domain name of the DWL-7100AP, if applicable. (An example of a domain name is: www.dlink.com.)
The Lease Time is the period of time before the DHCP server will assign new IP addresses.
Turn the
Dynamic Pool Settings ON
or
OFF
here.
Page 69 / 96
µ·
D-Link DWL-7100AP User Manual
Client-Info
Select this option to obtain information on
802.11g and 802.11a clients. A client is a device
on the network that is communicating with the
DWL-7100AP.
Displays the MAC address of the client.
Displays the wireless band.
Displays the type of authentication that is
enabled.
Receive Signal Strength Indicator indicates the
strength of the signal.
Displays the status of the power saving feature.
The following information is available for each client that is
communicating with the DWL-7100AP.
Client Info:
MAC Address:
Band:
Authentication:
RSSI:
Power Saving Mode:
Page 70 / 96
70
D-Link DWL-7100AP User Manual
Check this box to enable logging.
Enter the IP address of the Syslog server.
Select
Enable
or
Disable
from the drop-down
menus. There are 3 types: System Activity,
Wireless Activity, and Notice.
Remote Syslog Status:
Activity:
Remote Syslog
Status Server IP:
Log
19216811.live