Page 76 / 96
Scroll up to view Page 71 - 75
7µ
D-Link DWL-7100AP User Manual
If you want to enable Encryption, enter the Encryption values
here.
Click
Next
.
Enter the
SSID
and the
Channel
for the IEEE network.
Auto Channel Scan is enabled by default. The access
point will scan for the best available channel.
Click
Next
.
Page 77 / 96
77
D-Link DWL-7100AP User Manual
If you want to enable Encryption, enter the Encryption values
here.
Click
Next
.
Click
Finish
to complete the setup.
Page 78 / 96
7¶
D-Link DWL-7100AP User Manual
Refresh
Click on this button to
refresh the list of devices
available on the network.
Devices with a checkmark next to them are still available on
the network. Devices with an X are no longer available on the
network.
Click on this button to view the version of AP Manager.
About
Page 79 / 96
7·
D-Link DWL-7100AP User Manual
The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for
a definition of IP Address Range.)
To check on the IP Address of the adapter, please do the following:
Right-click
on the
Local Area Connection
icon
in the task bar.
Click
on
Status
.
Checking the IP Address in Windows
®
XP
Networking Basics
This window will appear:
Click the
Support tab
.
Click
Close
.
Page 80 / 96
¶0
D-Link DWL-7100AP User Manual
Note:
DHCP-enabled routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses.
If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions:
Go to
Start
.
Double-click on
Control Panel
.
Assigning a Static IP Address in Windows
®
XP/2000
Double-click on
Network Connections
.
19216811.live