Page 41 / 91
Scroll up to view Page 36 - 40
DG-HR1400 User Manual
41
4-1-3 Internet Setup
This page is used to configure the parameters for Internet network which connects to
the WAN port of your Access Point. Here you may change the access method to static
IP, DHCP client or PPPoE by clicking the item value of WAN Access type.
Choose menu “
Setup
→
Internet Setup
”, below given screen will be displayed.
Setup procedure for ‘Static IP’:
Page 42 / 91
DG-HR1400 User Manual
42
Here is the description of every setup item:
Parameter
Description
IP Address
Please input the IP address assigned by your service provider.
Subnet Mask
Please input the subnet mask assigned by your service provider
Default Gateway
Please input the IP address of the gateway provided by your
service provider.
MTU Size
Please input the MTU value of your network connection here. If
you don’t know, you can use default value.
DNS Servers
1/2/3
Please input the IP address of DNS servers provided by your
service provider.
Setup procedure for ‘DHCP Client’:
Here is the description of every setup item:
Parameter
Description
Host Name
Please input the host name of your computer. This is
optional, and is only required if your service provider asks
you to do so.
MTU Size
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Attain DNS
Automatically
If your ISP specifies a DNS server IP address for you,
click the checkbox.
Set DNS Manually
Enter the DNS IP address manually provided by your ISP.
Page 43 / 91
DG-HR1400 User Manual
43
Setup procedure for ‘PPPoE’:
Here is the description of every setup item:
Parameter
Description
User Name
Please input user name assigned by your Internet service
provider here.
Password
Please input the password assigned by your Internet service
provider here.
Service Name
Please give a name to this Internet service, this is optional.
MTU Size
Please input the MTU value of your network connection here.
If you don’t know, you can use default value.
Connection Type
Please select the connection type of Internet connection you
wish to use.
Continuous
– The connection will be kept always On. If the
connection
is
interrupted,
the
router
will
re-connect
automatically.
Connect On-Demand
– Only connect when you want to surf
the Internet. “
Idle Time Out
” is set to stop the connection
when the network traffic is not sending or receiving after an
idle time.
Manual
– After you have selected this option, you will see the
“Connect” button and “Disconnect” button, click “Connect”
and the router will connect to the ISP. If you want to stop the
connection, please click “Disconnect” button.
Page 44 / 91
DG-HR1400 User Manual
44
Attain DNS
Automatically
If your ISP specifies a DNS server IP address for you, click
the checkbox.
Set DNS
Manually
Enter the DNS IP address manually provided by your ISP.
MAC Clone:
You can configure the MAC address of the WAN.
4-1-4 IPv6
In this section the IPv6 configuration can be done. The WAN and LAN parameters
can be defined using this section.
Page 45 / 91
DG-HR1400 User Manual
45
Static IPv6
In Static IPv6 mode, user can set the IPv6 IP address of the WAN port.
Parameter
Description
IPv6 address( WAN)
Enter the IPv6 address for WAN port.
Subnet Prefix Length
Enter the Subnet Prefix length here.
Default Gateway
Enter the IPv6 address of the default gateway.
Primary DNS address
Enter the preferred IPv6 DNS address.
Secondary DNS address
Enter the secondary IPv6 DNS address.
LAN IPv6 Address
Enter the Static LAN IPv6 address of the router.
Enable Autoconfiguration
Enable or Disable the Auto configuration (DHCP IPv6).
Autoconfiguration Type
Select the Type of Autoconfiguration from the Dropdown
19216811.live