Page 21 / 91
Scroll up to view Page 16 - 20
DG-HR1400 User Manual
21
•
Below mentioned screen will appear. Click on ‘
Next
’.
•
Enter the ‘
SSID
’ and click on ‘
Next
’.
Page 22 / 91
DG-HR1400 User Manual
22
•
Configure the wireless security. Enter the security mode i.e. either ‘
None
’ or
‘
WPA2 Mixed
’ and click on ‘
Next
’.
•
Following screen will appear. Click on ‘
Finish
’.
Page 23 / 91
DG-HR1400 User Manual
23
•
Lastly, the router will reboot as shown below.
Static IP (Cable Modem users)
•
Select Static IP Address if all the Internet port’s IP information is provided to
you by your ISP. You will need to enter in the IP address, subnet mask,
gateway address and DNS address provided to you by your ISP. Each IP
address entered in the fields must be in the appropriate IP form, which are
four octets separated by a dot (x.x.x.x). The Router will not accept the IP
address if it is not in this format. Click on ‘
Next
’.
Page 24 / 91
DG-HR1400 User Manual
24
•
The screen shown below will appear. Click on ‘
Next
’.
•
Enter the ‘
SSID
’ and click on ‘
Next
’.
Page 25 / 91
DG-HR1400 User Manual
25
•
Configure the wireless security. Enter the security mode i.e. either ‘
None
’ or
‘
WPA2 Mixed
’ and click on ‘
Next
’.
•
You can view the information about the wireless configuration in the next
screen. Click ‘
Finish
’ to save your current settings and reboot the router.
19216811.live