1. Home
    2. /
  2. Manuals
    3. /
  3. Digisol
    4. /
  4. DG-HR1400
    5. /
  5. 8
Page 36 / 91 Scroll up to view Page 31 - 35
DG-HR1400 User Manual
36
width for your clients automatically.
Wireless Security
If the access point enables wireless security, you have to
follow the same settings in order to access the access point.
When you finish with all settings, press ‘
Next
’; if you want to go back to previous
menu, click ‘
Back
’.
Step 3 Finish the Quick Setup:
Below given ‘
Finish
’ screen will appear.
You can click the “
Finish
” button to finish the Quick Setup; if you want to go back to
previous menu, click ‘
Back
’.
Page 37 / 91
DG-HR1400 User Manual
37
4. Configuring the Router
This section will show each Web page’s key functions and the configuration way.
After your successful login, you will see the five main menus on the top of the
Web-based utility. On the right, there are corresponding explanations and
instructions.
4-1 Setup
Click ‘
Setup
’ menu on the top of the web management interface, and the following
message will be displayed on your web browser:
There are five submenus under the Setup menu:
Wizard, Local Network, Internet
Setup, IPv6 and Mode Settings
. Click any of them, and you will be able to
configure the corresponding function.
4-1-1 Wizard
If you are new to networking and have never configured a router before, click on
Wizard and the router will guide you through few simple steps to get your network up
and running.
Choose menu “
Setup
→
Wizard
”, below given screen will be displayed.
For details please refer to
3.3 Using Quick Setup
on above.
Page 38 / 91
DG-HR1400 User Manual
38
4-1-2 Local Network
These are the settings of the LAN (Local Area Network) interface for the router.
Choose menu “
Setup
→
Local Network
”, below given screen will be displayed.
This page is used to configure the LAN interface of your Wireless Router. Here you
may change the setting for IP address, subnet mask, etc.
This page can be used to configure the DHCP mode: None or DHCP Server.
(1) Enable the DHCP Server if you are using this device as a DHCP server. This page
lists the IP address pools available to hosts on your LAN. The device distributes
numbers in the pool to hosts on your network as they request Internet access.
If you choose "
None
", then the router will do nothing when the hosts request an IP
address.
Page 39 / 91
DG-HR1400 User Manual
39
(2) This page lists the fixed IP/MAC address on your LAN. The device distributes
the number configured to hosts on your network as they request Internet access.
LAN Interface Setup:
Here is the description of every setup item:
Parameter
Description
IP address
Please input the IP address of this router.
Subnet Mask
Please input the subnet mask for this network.
DHCP Server Settings:
These settings are only available when ‘
DHCP Server
’ in ‘
LAN IP
’ section is
‘
Enabled
’, and here is the description of every setup item.
Parameter
Description
DHCP Mode
Enable or Disable the DHCP Server.
IP Pool Range
These two IP values (from and to) define a range of IP
addresses that the DHCP Server uses when assigning addresses
to computers and devices on your Local Area Network. Any
address that does not fall in this range are not managed by the
DHCP Server; these could, therefore, be used for manually
configured devices or devices that cannot use DHCP to obtain
network address details automatically.
Page 40 / 91
DG-HR1400 User Manual
40
Max Lease Time
The amount of time that a computer may have an IP address
before it is required to renew the lease. The lease functions, just
as a lease on an apartment would. The initial lease designates
the amount of time before the lease expires. If the tenant wishes
to retain the address when the lease is expired then a new lease
is established. If the lease expires and the address is no longer
needed then another tenant may use the address.
Domain Name
Domain name for the DHCP server scope.
DNS Server
DNS Server address for the DHCP server scope.
DHCP Static IP Configuration:
If you need to assign static IP for your computer or device on the local area network,
configure static IP with the MAC address.
Here is the description of every setup item:
Parameter
Description
IP address
The IP address to be configured for your computer
or device on the local area network. For example,
192.168.2.2.
Mac Address
After you enter MAC address and IP address pair,
click this button to add the pair to static DHCP
leases table.
After you clicked ‘
Add
’, the MAC address and IP address mapping will be added
to ‘
DHCP Static IP Table
’ section.

Rate

4.5 / 5 based on 2 votes.

Popular Digisol Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top