Page 46 / 91
Scroll up to view Page 41 - 45
DG-HR1400 User Manual
46
list.
Router Advertisement
Lifetime
Set the value of Router advertisement duration.
SLAAC/DHCPv6
In this section we can set the WAN parameters as per DHCP IPv6.
Page 47 / 91
DG-HR1400 User Manual
47
PPPoE
Parameter
Description
Username
Type the PPPoE username provided by ISP
Password
Type the PPPoE password provided by ISP
Service Name
Type the Service name provided by ISP (optional)
MTU Size
Type the MTU size ( Defined by ISP)
Connection Type
Select the connection type.
Page 48 / 91
DG-HR1400 User Manual
48
4-1-5 Mode Settings
This page is used to configure mode.
Choose menu “
Setup
→
Mode Settings
”, below given screen will be displayed.
Here is the description of every setup item:
Parameter
Description
Bridge Mode
The device works as a bridge. All ethernet wired ports
and wireless ports are bridged together.
Router Mode
The device works as a router. It can access the Internet by
Static IP/DHCP Client/PPPoE.
NOTE: The device would reboot if you change the mode.
Page 49 / 91
DG-HR1400 User Manual
49
4-2 Wireless
Click ‘
Wireless
’ menu on the top of web management interface, and the following
message will be displayed on your web browser:
There are six submenus under the Wireless menu:
Wireless Basics, MBSSID, WPS,
Wireless Advanced, Wireless Repeater and WDS.
Click any of them, and you will
be able to configure the corresponding function.
4-2-1 Wireless Basics
This page is used to configure the parameters for wireless LAN clients which may
connect to your Access Point. Here you may change wireless encryption settings as
well as wireless network parameters.
Choose menu “
Wireless
→
Wireless Basics
”, below given screen will be displayed.
Page 50 / 91
DG-HR1400 User Manual
50
Setup procedure for AP:
Here is the description of every setup item:
Parameter
Description
Enable SSID
Broadcast
If Enabled, the Wireless Access Point will broadcast its name
(SSID) to all Wireless Stations. Stations which have no SSID (or
a null value) can then adopt the correct SSID for connections to
this Access Point.
Enable Wireless
Isolation
If checked, the wireless client under this SSID can only access
internet and it can’t access other wireless clients even under the
same SSID, Ethernet clients or this device. Other clients can’t
access the wireless client, either.
Name(SSID)
Enter a value of up to 32 alphanumeric characters. The same
name (SSID) must be assigned to all wireless devices in your
network. The default SSID is "DIGISOL”, but we strongly
recommend that you change your network’s name (SSID) to a
different value. This value is case-sensitive. For example, SSID
is not the same as SsiD.
19216811.live