Page 66 / 91
Scroll up to view Page 61 - 65
DG-HR1400 User Manual
66
4-3-5 IP/Port Filter
Entries in this table are used to restrict certain types of data packets from your local
network to Internet through the Gateway. Use of such filters can be helpful in
securing or restricting your local network.
Choose menu “
Advanced
→
IP/Port Filter
”, below given screen will be displayed.
Here is the description of every setup item:
Parameter
Description
Default Action
Status
Select Deny or Permit.
Protocol
The protocol used to filter, either IP, ICMP, TCP, or UDP.
Rule Action
Select Permit or Deny.
Direction
You can choose the type for the IP/Port Filter on the
pull-down list.
Source IP Address
Specify the source IP address that will be affected by this
rule.
Dest IP Address
Specify the destination IP address that will be affected by
this rule.
SPort
Specify the source port range that will be affected by this
rule.
Page 67 / 91
DG-HR1400 User Manual
67
DPort
Specify the destination port range that will be affected by
this rule.
Enable
Check this box to enable the IP/Port Filter features; uncheck
to disable it.
4-3-6 MAC Filter
Entries in this table are used to restrict certain types of data packets from your local
network to Internet through the Gateway. Use of such filters can be helpful in
securing or restricting your local network.
Choose menu “
Advanced
→
MAC Filter
”, below given screen will be displayed.
Page 68 / 91
DG-HR1400 User Manual
68
Here is the description of every setup item:
Parameter
Description
Default Policy
Select Deny or Permit.
Direction
You can choose the type for the MAC Filter on the pull-down
list.
Action
Select Deny or Permit.
Source MAC
Specify a source MAC address.
Destination MAC
Specify a destination MAC address.
4-3-7 DOS Settings
A "
denial-of-service
" (DoS) attack is characterized by an explicit attempt by hackers
to prevent legitimate users of a service from using that service.
Choose menu “
Advanced
→
DOS Settings
”, below given screen will be displayed.
Page 69 / 91
DG-HR1400 User Manual
69
Here is the description of every setup item:
Parameter
Description
Enable DoS
Prevention
Check this box to enable the Dos Prevention features;
uncheck to disable it.
Enable source IP
blocking
The Router will block the IP Address of source which sends
the DoS attack for specified time.
4-3-8 Dynamic DNS
This page is used to configure the Dynamic DNS address from Oray, No-IP,
DynDNS.org and TZO. Here you can Add/Remove to configure Dynamic DNS.
Choose menu “
Advanced
→
Dynamic DNS
”, below given screen will be displayed.
Here is the description of every setup item:
Parameter
Description
Enable
Check this box to enable the DDNS features; uncheck to
disable it.
Page 70 / 91
DG-HR1400 User Manual
70
DDNS Provider
Choose your DDNS Provider from the drop down menu.
Host Name
Enter the Host Name that you have registered with your
DDNS service provider.
Username
Enter the Username for your DDNS account.
Password
Enter the Password for your DDNS account.
4-3-9 Qos Setup
This page is used to configure QoS bandwidth and rules.
Choose menu “
Advanced
→
Qos Setup
”, below given screen will be displayed.
Here is the description of every setup item:
Parameter
Description
Up Stream
The upload speed through the WAN port.
Down Stream
The download speed through the WAN port.
Auto Traffic
Shaping
Check this box to enable the Auto Traffic Shaping features;
uncheck to disable it.
19216811.live