Page 76 / 91
Scroll up to view Page 71 - 75
DG-HR1400 User Manual
76
4-4-2 Firmware Upgrade
The Firmware Upgrade section can be used to upgrade to the latest firmware code to
improve functionality and performance.
Choose menu “
Maintenance
→
Firmware Upgrade
”, below given screen will be
displayed.
The Firmware Upgrade section can be used to upgrade to the latest firmware code to
improve functionality and performance.
To update the firmware, follow these steps:
1
Click the Browse button to locate the upgrade file on your computer.
2
Once you have found the file to be used, click the Upload button below to start
the firmware update process. This can take a minute or more.
3
Wait for the router to reboot. This can take another minute or more.
NOTE: Some firmware updates reset the configuration options to the
factory defaults. Before performing any update, be sure to
save the current configuration.
Page 77 / 91
DG-HR1400 User Manual
77
4-4-3 Backup/Restore
Save your configurations in a file on your computer so that it may be accessed again
later if your current settings are changed. Be sure to save the configuration before
performing a firmware update.
Choose menu “
Maintenance
→
Backup/Restore
”, below given screen will be
displayed.
Here is the description of every setup item:
Parameter
Description
Save Settings to
File
Press ‘Save’ button, and you’ll be prompted to download the
configuration as a file, default filename is ‘config.img’, you can
save it as another filename for different versions, and keep it in a
safe place.
Load Settings
From
Press ‘Browse…’ to pick a previously-saved configuration file
from your computer, and then click ‘Upload’ to transfer the
configuration file to the router. After the configuration is
uploaded, the router’s configuration will be replaced by the file
you just uploaded.
Page 78 / 91
DG-HR1400 User Manual
78
4-4-4 Password
This page is used to add user account to access the web server of Wireless Router.
Empty user name or password is not allowed.
Choose menu “
Maintenance
→
Password
”, below given screen will be displayed.
Here is the description of every setup item:
Parameter
Description
User Name
Please input new User Name here.
Privilege
Please select the privilege of account you wish to use.
Old Password
Please input current password here.
New Password
Please input new password here.
Confirm
Password
Please input new password here again.
Page 79 / 91
DG-HR1400 User Manual
79
4-4-5 Time and Date
This page is used to configure the system time and Network Time Protocol (NTP)
server.
Choose menu “
Maintenance
→
Time and Date
”, below given screen will be
displayed.
Here is the description of every setup item:
Parameter
Description
System Time
Displays the current time of the router. If the time is incorrect,
please fill in the correct time.
Daylight Saving
Offset
Check this option if your location observes daylight saving time.
Daylight saving time begins in the southern hemisphere between
September–November and ends between March–April. Standard
time begins in the southern hemisphere between March–April
and ends between September–November. Many countries in the
southern hemisphere may observe DST.
Page 80 / 91
DG-HR1400 User Manual
80
State
There are two options here: Enable or Disable. The default value
is Disable.
Server
You can fill the address used for clock synchronization of
network time server.
Time Zone
You can select your time zone drop-down box.
Start NTP
You can click Get GMT Time from network time server.
4-4-6 System Log
This page is used to display the system event log table. By checking Error or Notice
(or both) will set the log flag.
Choose menu “
Maintenance
→
System Log
”, below given screen will be displayed.
19216811.live