Page 26 / 91
Scroll up to view Page 21 - 25
DG-HR1400 User Manual
26
3. Quick Install Guide
3-1 Connecting to wireless broadband router by web browser
After the network connection is setup, next step is to setup the router with proper
network parameters, so it can work properly in your network environment.
Please use the web browser to configure the router. A computer with wired Ethernet
connection to the router is required for this first-time configuration.
Before you start to configure the router (
), please configure the
IP address of the computer in the same network class as that of the router.
Set the Network Configurations:
1.
On your computer desktop right click "
My Network Places
" and select
"
Properties
".
2.
Right click "
local Area Network Connection
" and select "
Properties
".
Page 27 / 91
DG-HR1400 User Manual
27
3.
Select "
Internet Protocol (TCP/IP)
" and click "
Properties
".
4.
Select "
Obtain an IP address automatically
" or select "
Use the following IP
address
".
A. Select "
Obtain an IP address automatically
" and "
Obtain DNS server
address automatically
". Click "
OK
".
Page 28 / 91
DG-HR1400 User Manual
28
B. “
Use the following IP address
"
IP Address: 192.168.2.XXX (XXX is a number from 2~254)
Subnet Mask: 255.255.255.0
DNS Server: You need to input the DNS server address provided by your ISP.
Otherwise, you can use the Router's default gateway as the DNS proxy server.
Click "
OK
" to save the configurations.
Page 29 / 91
DG-HR1400 User Manual
29
3-2 Getting Started
Connecting the router’s management interface by web browser:
After you assign an IP address to the computer, open the web browser, and type the
IP address of the router in the address bar as ‘
’.
The following message should be shown:
Please input user name and password in the field respectively, default user name is
‘
admin
’, and default password is ‘
1234
’, then press ‘
Login
’ button, and you can see
the web management interface of this router:
Page 30 / 91
DG-HR1400 User Manual
30
NOTE: If you can’t see the web management interface, and you’re being
prompted to input user name and password again, it means you
didn’t input username and password correctly. Please retype
user name and password again.
TIP: This page shows the current status and some basic settings of
the device.
19216811.live