Zyxel X650 Router Manual PDF (Setup & Configuration Guide)

Page 61 / 152 Scroll up to view Page 56 - 60

59

Here are descriptions of each setup item:

DNS Address (1):

Please input the IP address of DNS server provided by

your service provider.

Secondary

Please input the IP address of another DNS

DNS Address (2):

server provided by your service provider (this is

optional).

After you finish with all settings, please click ‘Apply’ (3) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to return to the previous setup menu and continue with

other setup procedures, or click ‘Apply’ to reboot the router so that settings

NOTE: Only IP addresses can be entered here;

DO NOT

use the

hostname of DNS server! (i.e. only numeric characters and dots are

accepted)

10.20.30.40……………………………………………………………… Correct

1

2

3

Page 62 / 152

60

take effect (Please wait about 40 seconds for router to reboot).

If you want to reset all settings on this page back to their previously-saved

values, please click the ‘Cancel’ button.

6.8 Setup procedure for ‘DDNS’:

DDNS (Dynamic DNS) is an IP-to-Hostname mapping service for Internet

users who do not have a static (fixed) IP address. It will be a problem when

such a user wants to provide services to other users on Internet, because their

IP address will vary every time they are connected to the Internet and other

users will not be able to know which IP address they are using at any given

time.

This router supports DDNS service of several service providers, for example:

DynDNS (

http://www.dyndns.org

)

TZO (

http://www.tzo.com

)

Please go to one of the DDNS service provider’s webpages listed above, and

get a free DDNS account by following the instructions given on their webpage.

1

2

3

4

5

6

Page 63 / 152

61

Here are descriptions of each setup item:

Dynamic DNS (1):

If you want to enable DDNS function, please select

‘Enabled’; otherwise please select ‘Disabled’.

Provider (2):

Select your DDNS service provider here.

Domain Name (3):

Input the domain name you obtained from DDNS service

provider.

Account /

Input account or email of DDNS registration.

E-Mail (4):

Password / Key (5):

Input DDNS service password or key.

After you finish with all settings, please click ‘Apply’ (6) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to return to the previous setup menu and continue with

other setup procedures, or click ‘Apply’ to reboot the router so that settings

take effect (Please wait about 40 seconds for router to reboot).

If you want to reset all settings on this page back to their previously-saved

values, please click the ‘Cancel’ button.

Page 64 / 152

62

6.9 Setup procedure for ‘WISP’:

If your network service is provided through a wireless network, please select

this mode. After you have connected the X650 to the access point of your

service provider wirelessly, please setup the WAN connection type on the

WAN page.

Here are descriptions of each setup item:

Disable/Enable/

There are three selections for disabling or enabling

Enable (Station

wireless ISP functions.

Mode Only) (1):

Disable: disable this function.

Enable: enable this function and the X650 can also act as

an access point and allow wireless clients to attach to it

for WAN access service.

Note: In this mode, if you are informed by your

wireless ISP that the wireless settings of the access

point have been changed, please use this page for

matching the settings.

SSID (2):

This is the name of your wireless network. Input the SSID

name that your wireless ISP provides to you.

1

2

3

4

5

7

6

Page 65 / 152

63

Channel Number (3):This is the radio frequency used to transmit and receive

the wireless signal. Wireless devices in the same network

should follow the same settings. Select the channel

designated by your wireless ISP.

Wireless Band (4):

Check with your Wireless ISP service provider whether it

is the 2.4GHz or the 5GHz wireless band that is used for

the network and then select the wireless band here.

Site Survey (5):

Click ‘Select Site Survey’ button, then a “Wireless Site

Survey Table” will pop up. It will list all available access

points nearby. Select the access point designated by your

wireless ISP in the table and the X650 will join the

wireless network through this access point.

Security Setting (6): If the access point enables wireless security, you have to

follow the same settings in order to utilize the access

point. Click to set security settings for this connection

(Please go to section ‘8.3 Wireless Security’ for detailed

instructions).

After you finish with all settings, please click ‘Apply’ (7) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to return to the previous setup menu and continue with

other setup procedures, or click ‘Apply’ to reboot the router so that settings

take effect (Please wait about 40 seconds for router to reboot).

If you want to reset all settings on this page back to their previously-saved

Rate

Popular Zyxel Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share