1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. X650
    5. /
  5. 17
Page 81 / 152 Scroll up to view Page 76 - 80
79
8.1.4 Setup procedure for ‘AP Bridge
‐
Point to Multi
‐
Point’:
In this mode, you can connect your X650 with at least four other wireless
routers to expand the scope of wireless network, and all clients (wired only –
AP will not accept wireless clients in this mode) of the two routers will think
they are on the same physical network.
2.4GHz AP Bridge (Point to Multi-Point) Settings
5GHz AP Bridge (Point to Multi-Point) Settings
1
2
3
4
5
6
7
8
Page 82 / 152
80
Here are descriptions of each setup item:
Band (2):
Select the band you want to use (all the wireless routers
must use the same settings).
Channel
Select the channel you want to use (all the wireless
Number (3):
routers must use the same settings).
MAC address
Input the MAC address(es) of other wireless router(s).
1 to 4 (4 - 7):
Security
Click to set security settings for this connection
Setting (8):
(Please go to section ‘8.3 Wireless Security’
for detailed instructions).
8.1.5 Setup procedure for ‘AP Bridge – WDS’
In this mode, you can expand the scope of network by combining up to four
other access points together while still allowing every access point to accept
wireless clients.
1
2
3
4
5
6
7
8
Page 83 / 152
81
2.4GHz AP Bridge (WDS) Settings
5GHz AP Bridge (WDS) Settings
Here are descriptions of each setup item:
Band (2):
Select the band you want to use (all the wireless routers
must use the same settings).
1
2
3
4
5
7
8
6
9
10
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.
1
2
3
4
5
7
8
6
9
10
Page 84 / 152
82
SSID (3):
Input the SSID of your wireless router (the setting should
be the same with other wireless routers for the
convenience of roaming).
Channel
Select the channel you want to use (all the wireless
Number (4):
routers must use the same settings).
Associated Clients (5):Click ‘Show Active Clients’ button, then an “Active
Wireless Client Table” will pop up. Here you can see the
status of all active wireless stations connected to the
access point.
MAC address
Input the MAC address of other wireless routers.
1 to 4 (6 - 9):
Security
Click to set security settings for this connection
Setting (10):
(Please go to section ‘8.3 Wireless Security’ for detailed
instructions).
8.1.6 Setup procedure for ‘Universal Repeater’
In this mode, the X650 can act as a wireless repeater; it can be a Station and
AP at the same time. It can use its Station function to connect to a Root AP and
use its AP function to service all wireless stations within its coverage.
NOTE: For Repeater Mode, this router will demodulate the received
signal, checking if this signal is noise for the operating network, then
have the signal modulated and amplified again. The output power of
this mode is the same as that of WDS and normal AP mode.
Page 85 / 152
83
2.4GHz Universal Repeater Settings
5GHz Universal Repeater Settings
Here are descriptions of each setup item:
Band (2):
Select the band you want to use (all the wireless routers
must use the same settings).
SSID (3):
This is the name of the wireless router. You can type any
alphanumerical characters here (maximum 32
characters). SSID is used to differentiate your wireless
router from others when there are other wireless routers
in the area. Default SSID is ‘default’; it is recommended
to change the default ESSID value to one that is
meaningful to you, like myhome, office_room1, etc.
Channel
Select the channel you want to use (all the wireless
Number (4):
clients must use the same settings).
1
2
3
4
5
7
6
1
2
3
4
5
7
6

Rate

4.5 / 5 based on 2 votes.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top