Page 56 / 152
Scroll up to view Page 51 - 55
54
WAN interface settings must be correctly set or the Internet connection will
fail, even if PPTP settings are correct. Please contact your Internet service
provider if you do not know what you should place in these fields.
Now please go to the PPTP settings section:
Here are descriptions of each setup item:
User Name (1):
Please input the user ID (user name) assigned by your
Internet service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
PPTP Gateway (3):
Please input the PPTP gateway IP address assigned by
your Internet service provider here.
Connection ID (4):
Please input the connection ID here (this is optional and
you can leave it blank)
MTU (5):
Please input the MTU value of your network connection
here. (If you do not know it, you can use the default
value.)
1
2
3
4
5
7
8
9
6
Page 57 / 152
55
BEZEQ-ISRAEL (6): If you are connecting to the BEZEQ network in Israel,
please enable this function.
Connection
Please select the type of Internet connection
type (7):
you wish to use (please refer to section 6.3 for detailed
descriptions)
Idle Time Out (8):
Please input the idle time out of Internet connection you
wish to use (refer to section 6.3 for detailed
descriptions).
When you finish with all settings, please click ‘Apply’ (9) button and the
following message will be displayed on your web browser:
Please click ‘Continue’ to return to the previous setup menu and continue with
other setup procedures, or click ‘Apply’ to reboot the router so that settings
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the ‘Cancel’ button.
Page 58 / 152
56
6.5 Setup procedure for ‘L2TP’:
Here are descriptions of each setup item:
User ID (1):
Please input the user ID (user name) assigned by your
Internet service provider here.
Password (2):
Please input the password assigned by your Internet service
provider here.
L2TP
Please input the PPTP gateway IP address
Gateway (3):
assigned by your Internet service provider here.
MTU (4):
Please input the MTU value of your network connection here.
(If you do not know it, you can use the default value).
Connection
Please select the type of Internet connection
type (5):
you wish to use (please refer to section 6.3 for detailed
descriptions.
Idle Time
Please input the idle time out of Internet connection
Out (6):
you wish to use (refer to section 6.3 for detailed
descriptions).
When you finish with all settings, please click ‘Apply’ (7) button and the
following message will be displayed on your web browser:
1
2
4
3
5
7
6
Page 59 / 152
57
Please click ‘Continue’ to return to the previous setup menu and continue with
other setup procedures, or click ‘Apply’ to reboot the router so that settings
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the ‘Cancel’ button.
6.6 Setup procedure for ‘Telstra Big Pond’:
This setting only works if you are using Telstra big pond’s network service in
Australia. You need to input:
User Name (1):
Please input the user name assigned by Telstra.
Password (2):
Please input the password assigned by Telstra.
1
2
3
4
5
Page 60 / 152
58
Assign login
Check this box to choose login server yourself.
server manually (3):
Server IP Address (4):Please input the IP address of login server here.
When you finish with all settings, click ‘Apply’ (5) button and the following
message will be displayed on your web browser:
Please click ‘Continue’ to return to the previous setup menu and continue with
other setup procedures, or click ‘Apply’ to reboot the router so that settings
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the ‘Cancel’ button.
6.7 Setup procedure for ‘DNS’:
If you select ‘
Dynamic IP
’ or ‘
PPPoE
’ as your Internet connection method, at
least one DNS server’s IP address should be assigned automatically. However,
if you have a preferred DNS server or your service provider did not assign the
IP address of the DNS server for any reason, you can input the IP address of
the DNS server here.
19216811.live