1. Home
  2. /
  3. Manuals
  4. /
  5. Zyxel
  6. /
  7. X650
  8. /
  9. 8
Page 36 / 152 Scroll up to view Page 31 - 35
34
4.2 Setup procedure for ‘Fixed
IP xDSL’:
Here are descriptions of each setup item:
IP Address (1):
Please input the IP address assigned
by your service provider.
Subnet Mask (2):
Please input the subnet mask assigned by your service
provider
DNS Address (3):
Please input the IP address of the DNS server provided
by your service provider.
Default
Please input the IP address of the DNS server
Gateway (4):
provided by your service provider.
When you finish with all settings, press ‘OK’ (5); if you want return to the
previous menu, click ‘Back’.
1
2
3
4
5
NOTE: You can choose this Internet connection method if your
service provider assigns a fixed IP address (also know as static
address) to you instead of using DHCP or PPPoE protocol. Please
contact your service provider for further information.
You must use the addresses provided by your Internet service
provider; an incorrect setting value will cause connection problems.
Page 37 / 152
35
4.3 Setup procedure for ‘PPPoE xDSL’:
Here are descriptions of each setup item:
User Name (1):
Please input user name assigned by your Internet service
provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
Service Name (3):
Please give a name to this Internet service (this is
optional)
MTU (4):
Please input the MTU value of your network connection
here. If you don’t know, you can use the default value.
Connection
Please select the type of Internet connection
Type (5):
you wish to use (detailed explanation listed below).
Idle Time Out (6):
Please input idle time out, (detailed explanation listed
below).
When you finish with all settings, please click ‘OK’ (7); if you want to return
1
2
4
3
5
6
7
Page 38 / 152
36
to the previous menu, click ‘Back’.
4.4 Setup procedure for ‘PPTP xDSL’:
PPTP xDSL requires two types of settings: WAN interface setting (setup IP
address) and PPTP setting (PPTP user name and password). Here we start from
the WAN interface setting:
Select how you prefer to obtain the IP address from your service provider here.
You can choose ‘Obtain an IP address automatically’ (equivalent to DHCP;
please refer to ‘Cable Modem’ section above), or ‘Use the following IP
MTU - Please use default MTU value if you do not know what it is or
ask your service provider for the proper value.
Connection Type - There are 3 options: ‘Continuous’ - keeps Internet
connection alive, ‘Connect on Demand’ - only connects to Internet
when there is a connection attempt, and ‘Manual’ - only connects to
Internet when ‘Connect’ button on this page is pressed, and
disconnects when ‘Disconnect’ button is pressed.
Idle Time Out: Specify the amount of time you want to pass before the
X650 shuts down the Internet connection after no Internet activity is
detected. This option is only available when connection type is
‘Connect on Demand’.
Page 39 / 152
37
address’ (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection will
fail even if the PPTP settings are correct. Please contact your Internet service
provider if you do not know what you should place in these fields.
Now please go to the PPTP settings section:
Here are descriptions of each setup item:
User Name (1):
Please input the user ID (user name) assigned by
your Internet service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
PPTP
Please input the IP address of the PPTP gateway
Gateway (3):
assigned by your Internet service provider here.
Connection
Please input the connection ID here (this is
ID (4):
optional and you can leave it blank).
MTU (5):
Please input the MTU value of your network connection
here. If you do not know, you can use the default value.
BEZEQ-ISRAEL (6): Setting item ‘BEZEQ-ISRAEL’ is only required if
you are using the service provided by BEZEQ network in
1
2
3
4
5
6
7
9
8
Page 40 / 152
38
Israel.
Connection
Please select the type of Internet connection you
type (7):
wish to use (please refer to last section for detailed
descriptions).
Idle Time
Please input the idle time out of Internet connection
Out (8):
you wish to use (refer to last section for detailed
descriptions)
.
When you finish with all settings, please click ‘OK’ (9); if you want to return
to the previous menu, click ‘Back’.
4.5 Setup procedure for ‘L2TP xDSL’:
L2TP is another popular connection method for xDSL and other Internet
connection types, and all required setting items are the same as with PPTP
connection.
Like PPTP, there are two types of required settings; we will start from ‘WAN
Interface Settings’:
Please select how you would prefer to obtain the IP address from your service

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top