Page 26 / 152
Scroll up to view Page 21 - 25
24
3.2.5 Windows 8 IP address setup:
1. Right-click ‘Start’ button (it should be located in the lower-left corner of
your computer screen), then click ‘Control Panel’. Click
Network and Sharing
Center
, and then click
Change adapter settings.
Right-click
Ethernet,
then
select
‘Properties’.
When
Ethernet Properties
window appears, select
‘Internet Protocol Version 4 (TCP / IPv4), and then click ‘Properties’.
Page 27 / 152
25
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address
automatically’, then click ‘OK’.
Page 28 / 152
26
3.2.6 Router IP address lookup
After the IP address setup is complete, please click ‘Start’ -> ‘Run’ at the
bottom-left corner of your desktop screen.
Page 29 / 152
27
Input ‘cmd’, and then click ‘OK’
Input ‘ipconfig’, then press ‘Enter’ key. Please check the IP address following
the ‘Default Gateway’ (In this example, the IP address of the router is
192.168.1.1; please note that this value may be different).
Page 30 / 152
28
3. Connect the X650’s management interface by web browser
After your computer has obtained an IP address from router, please start your
web browser and input the IP address of the X650 in the address bar
(192.168.1.1). The following message should be shown:
Please input user name and password in their respective fields (default user
name is ‘admin’, and default password is ‘1234’) and then press ‘OK’ button,
and you will see the web management interface of this router:
NOTE: If the IP address of the Gateway is not displayed, or the address
followed by ‘IP Address’ begins with ‘169’, please recheck network
connection between your computer and router and / or go to the beginning
of this chapter to recheck every step of the network setup procedure.
19216811.live