1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. P-660HN-F1Z
    5. /
  5. 9
Page 41 / 421 Scroll up to view Page 36 - 40
Chapter 2 Introducing the Web Configurator
P-660HN-FxZ Series User’s Guide
41
Figure 5
Replace Factory Default Certificate Screen
2.2
Web Configurator Main Screen
Figure 6
Main Screen
As illustrated above, the main screen is divided into these parts:
•
A
- title bar
•
B
- navigation panel
•
C
- main window
•
D
- status bar
2.2.1
Title Bar
The title bar provides some icons in the upper right corner.
A
B
C
D
Page 42 / 421
Chapter 2 Introducing the Web Configurator
P-660HN-FxZ Series User’s Guide
42
The icons provide the following functions.
2.2.2
Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL Device
features. The following tables describe each menu item.
Table 2
Web Configurator Icons in the Title Bar
ICON
DESCRIPTION
Help
: Click this icon to open up help screens.
Wizards
: Click this icon to go to the configuration wizards. See
Chapter 4 on page
53
for more information.
Logout
: Click this icon to log out of the web configurator.
Table 3
Navigation Panel Summary
LINK
TAB
FUNCTION
Status
This screen shows the ZyXEL Device’s general device and network status
information. Use this screen to access the statistics and client list.
Network
WAN
Internet Access
Setup
Use this screen to configure ISP parameters, WAN IP address assignment,
DNS servers and other advanced properties.
More
Connections
Use this screen to configure additional WAN connections.
WAN Backup
Setup
Use this screen to configure a backup gateway.
LAN
IP
Use this screen to configure LAN TCP/IP settings, enable Any IP and other
advanced properties.
DHCP Setup
Use this screen to configure LAN DHCP settings.
Client List
Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
IP Alias
Use this screen to partition your LAN interface into subnets.
Wireless LAN
AP
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP
Use this screen to configure multiple BSSs on the ZyXEL Device.
WPS
Use this screen to enable WPS (Wi-Fi Protected Setup) and view the WPS
status.
WPS Station
Use this screen to enable WPS (Wi-Fi Protected Setup) and set up your
wireless network.
WDS
Use this screen to set up Wireless Distribution System links to other access
points.
QoS
Use this screen to enable or disable Quality of Service (QoS).
Scheduling
Use this screen to configure the dates/times to enable or disable the
wireless LAN.
NAT
General
Use this screen to enable NAT.
Port Forwarding
Use this screen to make your local servers visible to the outside world.
ALG
Use this screen to enable or disable SIP ALG.
Page 43 / 421
Chapter 2 Introducing the Web Configurator
P-660HN-FxZ Series User’s Guide
43
Security
Firewall
General
Use this screen to activate/deactivate the firewall and the default action to
take on network traffic going in specific directions.
Rules
This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Threshold
Use this screen to configure the thresholds for determining when to drop
sessions that do not become fully established.
Content Filter
Keyword
Use this screen to block access to web sites containing certain keywords in
the URL.
Schedule
Use this screen to set the days and times for your device to perform content
filtering.
Trusted
Use this screen to exclude a range of users on the LAN from content
filtering.
Packet Filter
Use this screen to configure the rules for protocol and generic filter sets.
Certificates
My Certificates
Use this screen to generate and export self-signed certificates or
certification requests and import the ZyXEL Device’s CA-signed certificates.
Trusted CAs
Use this screen to save CA certificates to the ZyXEL Device.
Trusted Remote
Hosts
Use this screen to import self-signed certificates.
Directory
Servers
Use this screen to configure a list of addresses of directory servers (that
contain lists of valid and revoked certificates).
Advanced
Static Route
Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
802.1Q/1P
Group Setting
Use this screen to activate 802.1Q/1P, specify the management VLAN
group, display the VLAN groups and configure the settings for each VLAN
group.
Port Setting
Use this screen to configure the PVID and assign traffic priority for each
port.
QoS
General
Use this screen to enable QoS and traffic prioritizing, and configure
bandwidth management on the WAN.
Class Setup
Use this screen to define a classifier.
Monitor
Use this screen to view each queue’s statistics.
Dynamic DNS
This screen allows you to use a static hostname alias for a dynamic IP
address.
Table 3
Navigation Panel Summary
LINK
TAB
FUNCTION
Page 44 / 421
Chapter 2 Introducing the Web Configurator
P-660HN-FxZ Series User’s Guide
44
2.2.3
Main Window
The main window displays information and configuration fields. It is discussed in the rest of
this document.
Right after you log in, the
Status
screen is displayed. See
Chapter 3 on page 45
for more
information about the
Status
screen.
2.2.4
Status Bar
Check the status bar when you click
Apply
or
OK
to verify that the configuration has been
updated.
Remote MGMT
WWW
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Telnet
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP
Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
SNMP
Use this screen to configure your ZyXEL Device’s settings for Simple
Network Management Protocol management.
DNS
Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
ICMP
Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
UPnP
General
Use this screen to turn UPnP on or off.
Maintenance
System
General
Use this screen to configure your device’s name, domain name,
management inactivity timeout and password.
Time Setting
Use this screen to change your ZyXEL Device’s time and date.
Logs
View Log
Use this screen to display your device’s logs.
Log Settings
Use this screen to select which logs and/or immediate alerts your device is
to record. You can also set it to e-mail the logs to you.
Tools
Firmware
Use this screen to upload firmware to your device.
Configuration
Use this screen to backup and restore your device’s configuration (settings)
or reset the factory default settings.
Restart
This screen allows you to reboot the ZyXEL Device without turning the
power off.
Diagnostic
General
Use this screen to test the connections to other devices.
DSL Line
These screen displays information to help you identify problems with the
DSL connection.
Table 3
Navigation Panel Summary
LINK
TAB
FUNCTION
Page 45 / 421
P-660HN-FxZ Series User’s Guide
45
C
HAPTER
3
Status Screens
3.1
Overview
Use the
Status
screens to look at the current status of the device, system resources, and
interfaces (LAN and WAN). The
Status
screen also provides detailed information from Any
IP and DHCP and statistics from bandwidth management, and traffic.
3.2
The Status Screen
Use this screen to view the status of the ZyXEL Device. Click
Status
to open this screen.
Figure 7
Status Screen
Each field is described in the following table.
Table 4
Status Screen
LABEL
DESCRIPTION
Refresh Interval
Enter how often you want the ZyXEL Device to update this screen.
Apply
Click this to update this screen immediately.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top