Page 61 / 421 Scroll up to view Page 56 - 60
Chapter 4 Internet and Wireless Setup Wizard
P-660HN-FxZ Series User’s Guide
61
Figure 23
Connection Test Successful
2
Use this screen to activate the wireless LAN. Click
Next
to continue.
Figure 24
Wireless LAN Setup Wizard 1
The following table describes the labels in this screen.
3
Configure your wireless settings in this screen. Click
Next
.
Table 13
Wireless LAN Setup Wizard 1
LABEL
DESCRIPTION
Active
Select the check box to turn on the wireless LAN.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Page 62 / 421
Chapter 4 Internet and Wireless Setup Wizard
P-660HN-FxZ Series User’s Guide
62
Figure 25
Wireless LAN
The following table describes the labels in this screen.
"
The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.
4
This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click
Next
.
Table 14
Wireless LAN Setup Wizard 2
LABEL
DESCRIPTION
Network
Name(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
LAN.
If you change this field on the ZyXEL Device, make sure all wireless stations use the
same SSID in order to access the network.
Channel
Selection
The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a
channel. Select a channel ID that is not already in use by a neighboring device.
Security
Select
Manually assign a WPA-PSK key
to configure a Pre-Shared Key (WPA-PSK).
Choose this option only if your wireless clients support WPA. See
Section 4.3.1 on
page 63
for more information.
Select
Manually assign a WEP key
to configure a WEP Key. See
Section 4.3.2 on
page 63
for more information.
Select
Disable wireless security
to have no wireless LAN security configured and
your network is accessible to any wireless networking device that is within range.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Page 63 / 421
Chapter 4 Internet and Wireless Setup Wizard
P-660HN-FxZ Series User’s Guide
63
4.3.1
Manually Assign a WPA-PSK key
Choose
Manually assign a WPA-PSK key
in the Wireless LAN setup screen to set up a
Pre-
Shared Key
.
Figure 26
Manually Assign a WPA-PSK key
The following table describes the labels in this screen.
4.3.2
Manually Assign a WEP Key
Choose
Manually assign a WEP key
to setup WEP Encryption parameters.
Figure 27
Manually Assign a WEP key
Table 15
Manually Assign a WPA-PSK key
LABEL
DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Page 64 / 421
Chapter 4 Internet and Wireless Setup Wizard
P-660HN-FxZ Series User’s Guide
64
The following table describes the labels in this screen.
5
Click
Apply
to save your wireless LAN settings.
Figure 28
Wireless LAN Setup 3
6
Use the read-only summary table to check whether what you have configured is correct.
Click
Finish
to complete and save the wizard setup.
"
No wireless LAN settings display if you chose not to configure wireless LAN
settings.
Table 16
Manually Assign a WEP key
LABEL
DESCRIPTION
Key
The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters ("0-9", "A-F")
for a 64-bit or 128-bit WEP key respectively.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen.
Exit
Click this to close the wizard screen without saving.
Page 65 / 421
Chapter 4 Internet and Wireless Setup Wizard
P-660HN-FxZ Series User’s Guide
65
Figure 29
Internet Access and WLAN Wizard Setup Complete
7
Launch your web browser and navigate to www.zyxel.com. Internet access is just the
beginning. Refer to the rest of this guide for more detailed information on the complete
range of ZyXEL Device features. If you cannot access the Internet, open the web
configurator again to confirm that the Internet settings you configured in the wizard
setup are correct.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top