ZTE MF612 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 47 Scroll up to view Page 21 - 25

26



IP Address

: IP address for LAN interface.



Subnet Mask

: Subnet mask for the IP address.



MAC Address

: MAC address for the LAN interface.



DHCP Type

: Define the DHCP type. By default, router is set as

DHCP server.



DHCP Start IP

: Allocate start IP address

for IP pool.



DHCP End IP

: Allocate end IP address

for IP pool. The DHCP

End IP address should be larger than the DHCP Start IP address.



DHCP Lease Time

: Define how long the leased IP address will be

expired, and will relocate new IP address.



UPNP

: Enable Universal Plug and Play(UPNP) or not.

Click

Apply

to confirm your configuration.

2. DHCP Clients

Select

Router

→

DHCP Clients

, the DHCP clients parameters are

shown in the following figure:

Page 27 / 47

27

4.2.6 Wi-Fi Setting

1. Station list

Select

Wi-Fi Setting

→

Station List

, the wireless network stations

are

shown in the following figure:

2. Basic

Select

Wi-Fi Setting

→

Basic

, the wireless network basic parameters

are shown in the following figure:

Page 28 / 47

28



Wi-Fi On/Off

:

Enable Wi-Fi or not

.



Network Mode

:

If all of the wireless devices connect with this

router in the same transmission mode, performance will be

improved by choosing the appropriate wireless mode.



Network Name(SSID)

: Service Set Identifier(SSID). Enter a

string less than 32 characters as the name for your wireless local

area network(WLAN).



Broadcast Network Name(SSID)

: Disable or Enable(Default)

this function. If

Enable

is selected, the router broadcasts the

SSID, and other devices can detect and connect to it.



AP Isolation

: When

Enabled

is selected, each of your wireless

client will not be able to communicate with each other.



BSSID

: MAC address of the Wi-Fi.

Page 29 / 47

29



Frequency(Channel)

: Choose the appropriate channel to

optimize the performance and coverage of your wireless network.



WDS Mode

: WDS enable router to communicate with other APs,

WDS connection is two-way communication, APs should know

each others wireless MAC address. And make sure that all APs

share the same SSID and channel.

WDS configuration is shown below:

Step

Description

1.Set the same SSID

and channel for APs

Manually set the SSID and channel is

strongly recommended

2.Select WDS mode

：

Disable, Lazy Mode,

Bridge Mode or

Repeater Mode

·If you select

Disable

, WDS is

disabled.

·If you select

Lazy Mode

，

WDS is

enabled, and set wireless MAC

address only on the peer APs.

·If you select

Bridge Mode,

WDS is

enabled, and set the peer APs wireless

MAC address on router.

·If you select

Repeater Mode

, WDS is

enabled, and set the peer APs wireless

MAC address on router.

3.Select

Phy mode

:

CCK,OFDM,HTMIX or

GREENFIELD

-

4.Select

Encryp

Type:

WEP

，

TKIP

，

AES

If you select

NONE

, all the data

transmitted without encryption, and

other station can access router.

5.Set peer AP's

wireless MAC address

on router

Only

Repeater Mode

and

Bridge

Mode

need this

。

The HT physical Mode parameters are shown below:



Operating Mode

: In

Mixed Mode

, packets are transmitted with a

preamble compatible with the legacy 802.11a/g, the rest of the

packet has a new format. In

Green Field

, high throughput

packets are transmitted without a legacy compatible part.



Channel Bandwidth

: Set the HT physical channel bandwidth.



Guard Interval

: Guard interval is to introduce immunity to

propagation delays, echoes and reflections, to which digital data

Page 30 / 47

30

is normally very sensitive.



MCS

: The Modulation and Coding Scheme (MCS) is a value that

determines the modulation, coding and number of spatial

channels.



Reverse Direction Grant(RDG)

:Enable

RDG

or not.



Extension Channel

: Set extension channel.

Extension channel

is also able to send and receive data.



Aggregation MSDU(A-MSDU)

:To enable Hyper Throughput TX

Aggregate MAC Service Data Unit ,select

Enable.



Auto Block ACK

: Select to block ACK (Acknowledge Number)

or not during data transferring.



Decline BA Request

: Select to reject peer BA-Request or not.

Click

Apply

to confirm your configuration.

3. Advanced

Select

Wi-Fi Setting

→

Advanced

, the advanced wireless network

parameters are shown in the following figure:

Rate

Popular ZTE Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share