Page 96 / 128
Scroll up to view Page 91 - 95
1. Press
<Edit>
.
2.
System Name:
Type a name to be used for the switch.
3.
System Contact:
Type the name of contact person or organization.
4.
System Location:
Type the location of the switch.
5. Press
Ctrl+A
go back action menu line.
6.
Press
<Save>
to save the configure value.
- 96 -
Page 97 / 128
4.3.2.2. Community Strings
Use this page to Add/ Edit/ Delete SNMP community strings.
1. Community Name:
The name of current strings.
2. Write Access:
Enable the rights is read only or read-write.
Restricted:
Read only, enables requests accompanied by this string to display MIB-object
information.
Unrestricted:
Read write, enables requests accompanied by this string to display MIB-object
information and to set MIB objects.
- 97 -
Page 98 / 128
z
Add Community Name
1.
Press
<Add> --> <Edit>
key.
2. Community Name:
Type the community name.
3. Write Access:
Press
Space
key to select the right is restricted or unrestricted.
z
Edit Community Name
1.
Press
<Edit>
key, choose the item that you want to modify and then press
Enter.
2. Community Name:
Type the new name.
3. Write Access:
Press
<Space>
key to change the right is restricted or unrestricted.
- 98 -
Page 99 / 128
z
Delete Community Name
1. Press
<Delete>
key.
2.
Choose the community name that you want to delete and then press enter.
3. When pressing
<Enter>
once will complete deletion on delete mode.
- 99 -
Page 100 / 128
4.3.2.3. Trap Managers
A trap manager is a management station that receives traps, the system alerts generated by the switch.
If no trap manager is defined, no traps are issued. Create a trap manager by entering the IP address of
the station and a community string.
z
Add SNMP trap manager
Press
<Add> --> <Edit>
to add the trap manager.
IP:
Type the IP address.
Community Name:
Type the community name.
4.
Press
Ctrl +A
go to actions line, press
<Save>
key to save all configure.
- 100 -
19216811.live