Page 76 / 128
Scroll up to view Page 71 - 75
Page 77 / 128
4.2.5. Administration Configuration
4.2.5.1. Change Username
Use this page; user can change web management user name.
Type the new user name, and then press
<Save>
item.
- 77 -
Page 78 / 128
4.2.5.2. Change Password
Use this page; user can change web management login password.
4.2.5.3. Device Information
This page is provided to the user to configure the device information
.
- 78 -
Page 79 / 128
4.2.5.4. IP Configuration
User can configure the IP setting and fill in the new value.
- 79 -
Page 80 / 128
4.2.6. Port Mirror Configuration
The port mirroring is a method for monitor traffic in switched networks. Traffic through ports can be
monitored by one specific port. That is traffic goes in or out monitored ports will be duplicated into
monitoring port.
Actions->
Press
Space
key to change configure of per item.
1.
Select
<Edit>
.
2. Sniffer Mode:
Press
Space
key to set sniffer mode Disable
Rx
Tx or Both.
3. Monitoring Port:
It means sniffer port can be used to see all monitors port traffic. Press
Space
key to choose it.
4. Monitored Port:
The ports you want to monitor. All monitor port traffic will be copied to sniffer
port. You can select max 25 monitor ports in the switch. User can choose which port to monitor in
only one sniffer mode. Press
Space
key to choose member port, “V” – is the member, “—“ – not
the member.
5.
P
ress
Ctrl+A
go back action menu line
6.
Select
<Save>
to save all configure value.
7.
On the action menu line you can press
<Next Page>
to configure port9 ~ port26, press
<Previous
Page>
return to last page.
NOTE:
Only has one sniffer mode in switch at the same time.
- 80 -
19216811.live