Page 66 / 128
Scroll up to view Page 61 - 65
4.2.3.2. Create a VLAN Group
Create Port-Based VLAN
Create a port-based VLAN and add member/nonmember ports to it.
1.
Select
<Edit>
.
2.
VLAN Name:
Type a name for the new VLAN.
3.
Grp ID:
Type the VLAN group ID. The group ID rang is 1~4094.
4.
Member:
Press
<Space>
key to choose VLAN member. There are two types to selected:
a. Member:
the port is member port.
b. No:
the port is NOT member port.
5.
Press
Ctrl+A
go back action menu line.
6.
Select
<Save>
to save all configure value.
NOTE:
If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port26, and you can
configure it is the member of the VLAN or not.
- 66 -
Page 67 / 128
±
Create 802.1Q VLAN
Create an 802.1Q VLAN and add tagged /untagged member ports to it.
1.
Select
<Edit>
.
2. VLAN Name:
Type a name for the new VLAN.
3. VLAN ID:
Type a VID (between 1~4094). The default is 1. There are 256 VLAN groups to
provided configure.
4. Protocol VLAN:
Press
Space
key to choose protocols type.
5. Member:
Press
Space
key to choose VLAN member. There are three types to selected:
a. UnTagged
This port is the member port of this VLAN group and outgoing frames are NO
VLAN-Tagged frames.
b. Tagged
This port is the member port of this VLAN group and outgoing frames are
VLAN-Tagged frames.
c. NO
The port is NOT member of this VLAN group.
6.
Press
Ctrl+A
go back action menu line.
7.
Select
<Save>
to save all configure value.
NOTE:
If the trunk groups exist, you can see it (ex: TRK1, TRK2…) after port 26, and you can
configure it is the member of the VLAN or not.
- 67 -
Page 68 / 128
4.2.3.3. Edit / Delete a VLAN Group
In this page, user can edit or delete a VLAN group.
1. Press
<Edit> or <Delete>
item.
2.
Choose the VLAN group that you want to edit or delete and then press enter.
3.
User can modify the protocol VLAN item and the member ports are tagged or un-tagged and
remove some member ports from this VLAN group.
4. After edit VLAN, press
<Save>
key to save all configures value.
NOTE
1. When pressing
<Enter>
once will complete deletion on delete mode.
2.
The VLAN Name and VLAN ID cannot modify.
3.
The default VLAN can’t be deleting.
- 68 -
Page 69 / 128
4.2.3.4. Groups Sorted Mode
In this page, user can select VLAN groups sorted mode:
(1) sorted by name
(2) Sorted by VID.
The
Edit/Delete a VLAN group
page will display the result.
In the
Edit/Delete a VLAN Group
page, the result of
sorted by name
.
In the
Edit/Delete a VLAN Group
page, the result of
sorted by VID
.
- 69 -
Page 70 / 128
4.2.4. Misc Configuration
- 70 -
19216811.live