Page 36 / 139
Scroll up to view Page 31 - 35
ADSL2/2+ Router
Page 3
±
PPP User Name:
User name for PPPoE dialup. It is provided by
your ISP.
±
PPP Password:
The password provided by your ISP for PPPoE
dialup.
±
PPPoE Service Name:
It is provided by your ISP. Do not fill it in if
you don’t have it; otherwise PPPoE dialup may fail.
±
Authentication Method:
It is used by ISP to verify its clients
during PPPoE dialup. Select “Auto” if you are not sure about it.
±
Clone MAC
：
This feature clones the MAC address of the PC that
is currently entering the router’s management page to work as the
WAN MAC address of the router.
±
Dial on Demand:
Automatically connects or disconnects Internet
according to the use of the network. It is recommended when your
ISP limits network use time.
- 36 -
Page 37 / 139
ADSL2/2+ Router
±
PPP IP extension:
The IP addresses of all packets including
management packets that egress WAN port will be converted to
the WAN port’s IP address once this feature is enabled.
±
Enable PPP Debug Mode:
This feature can be enabled only
when supported by your ISP.
±
Bridge PPPoE Frames Between WAN and Local Ports
：
PPPoE
dialup frame initiated by LAN port will directly egress WAN port
without being modified if this feature is enabled.
±
Multicast Proxy:
Router enables multicast proxy server if this
feature is enabled.
Enter the PPP user name and PPP Password provided by your ISP. For
other options, keep the default values if you are not clear about them,
and then click the “Next” button to display the following screen (page 4):
Page 4
This page allows you to configure the gateway address for WAN
connection. We recommend you to keep the default values and click
the “Next” button on page 4 to enter the following page (page 5):
- 37 -
Page 38 / 139
ADSL2/2+ Router
page 5
This page allows you to configure the DNS server’s IP address for the
WAN port. We recommend you to keep the default values if you are not
clear about it and click the “Next” button (on page 5) to enter the
following page (page 6):
- 38 -
Page 39 / 139
ADSL2/2+ Router
Page 6
This page displays the configuration information. After confirmation,
please click “Apply/Save” to save it.
You can access Internet once PPPoE dialup succeeds.
IP over Ethernet
When your ISP provides you an IP address or tells you that you only
need to configure your PC to obtain an IP address automatically to
access Internet, you need to select IP over Ethernet
（
IPoE
）
as the WAN
service type.
Modify the service description if necessary and then click the “Next”
button:
- 39 -
Page 40 / 139
ADSL2/2+ Router
±
Obtain an IP address automatically:
WAN port will automatically
obtain an IP address for accessing Internet from the ISP, if this
feature is selected.
±
Use the following Static IP address:
select this feature if your
ISP provides you an IP address.
±
WAN IP Address:
the IP address provided by your ISP for
accessing Internet.
±
WAN Subnet Mask:
the subnet mask address provided by your
ISP for accessing Internet.
±
WAN gateway IP Address:
the gateway IP address provided by
your ISP for accessing Internet.
Enter the IP/ subnet mask/gateway IP address provided by your ISP or
select “Obtain an IP address automatically” and click the “Next” button
(on page 1) to enter page 2 below:
- 40 -
19216811.live