Page 21 / 139
Scroll up to view Page 16 - 20
ADSL2/2+ Router
3.3Fast Internet Access
In previous section, we have explained how to log on to the router and
in the following; we are going to illustrate how to configure the router
quickly to let your PC access Internet.
Now check whether you have the screen below, if not, please re-log on
to the router’s management interface.
The device provides two Internet access ways: DSL Uplink and
Ethernet Uplink. If you are using Ethernet Uplink (through network
cable) for Internet access, please click the “Advanced Settings” on top
right corner of the interface to enter the configuration interface and refer
to section 2 of Chapter 4.2.2 WAN Service for configurations.
You need to configure the parameters below on this interface:
- 21 -
Page 22 / 139
ADSL2/2+ Router
1.
VPI/VCI
2.
PPPOE User name
3.
PPPOE Password
VPI/VCI:
Different areas and ISPs have different VPI/VCI. For the
convenience of its users, the device has integrated many important
VPI/VCI. Therefore, you only need to select your ISP and area and the
device will provide you with an auto-matched VPI/VCI in accordance
with your area. However, if your ISP provides you with a special
VPI/VCI, then select
“
Manual
”
for ISP option and enter the value
manually.
PPPOE User name:
the user name provided by your ISP; used
together with password to authenticate the user.
PPPOE Password:
the password provided by your ISP; used together
with user name to authenticate the user.
For example:
User A obtains a user name and a pass word, which are
Telecom for ADSL broadband, so he/she needs to input the parameters
as below:
Note:
For the sake of security, password input on Web UI is displayed
in encryption code.
This product supports wireless function, so you still have to configure
- 22 -
Page 23 / 139
ADSL2/2+ Router
wireless parameters. Please read the following:
Key
：
It
allows you to enter a password; only the users who know your
password can be connected to your wireless network.
For example,
if you want to set the password to 88888888, follow the
configurations as shown in the figure below:
Note:
1. The wireless network name (SSID) of this device is “tenda_the last 6
characters of MAC address”, for example,
“
tenda_051609
”
. You can
check it by clicking “Advanced Setup”------“Wireless”--------“Basic
Setting” tabs.
“
”
- 23 -
Page 24 / 139
ADSL2/2+ Router
- 24 -
“
”
“
”
’
After all settings are finished and status shows “Connected”.
Congratulations! You can access Internet now!
Page 25 / 139
ADSL2/2+ Router
and Internet access will be successful as below:
Now, try to use a wireless network adapter to search “tenda_051609”:
First, click
(network adapter connection icon) to search wireless
signals as shown in the figure below:
- 25 -
19216811.live