Page 41 / 139
Scroll up to view Page 36 - 40
ADSL2/2+ Router
Page 1
Page 2
We recommend you to keep the default settings unchanged and click
the “Next” button (on page 2) to enter the screen (page 3) below:
- 41 -
Page 42 / 139
ADSL2/2+ Router
Page 3
This page allows you to configure the gateway address for WAN
connection. We recommend you to keep the default values and click
the “Next” button (on page 3) to enter the following page (page 4):
Page 4
This page allows you to configure the DNS server’s IP address for the
WAN port. We recommend you to keep the default values if you are not
clear about it and click the “Next” button (on page 4) to enter the
- 42 -
Page 43 / 139
ADSL2/2+ Router
following page (page 5):
Page 5
This page displays the configuration information. After confirmation,
please click “Apply/Save” to save it.
You can access Internet once the configured connection succeeds.
Bridging
If you want to use your PC or other devices to execute dialup or you do
not want to share your broadband service with other users, you can first
configure your router’s WAN service type as bridging and then use your
PC or other devices for dialup connection.
- 43 -
Page 44 / 139
ADSL2/2+ Router
Modify the service description if necessary and then click “Next”.
This page displays the configuration information. After confirmation,
please click “Apply/Save” to save it.
- 44 -
Page 45 / 139
ADSL2/2+ Router
After successful configurations, use your PC or other devices to dialup
and then you can access Internet.
Note:
When you need to configure several WAN connections (multiple
PVCs), first configure the needed number of ATM interfaces and then
follow the above corresponding configuration procedures.
PPPOA
First, click “Advanced Setup”—
“
Connection Mode
”
(select DSL Mode
and click “Apply”)----“WAN Service”---“ATM Interface” to enter ATM
PVC
Configuration
interface;
Then
select
PPPoA
and
click
“Apply/Save” there as shown in the figure below:
- 45 -
19216811.live