Page 26 / 139
Scroll up to view Page 21 - 25
ADSL2/2+ Router
Then click “tenda_051609”select “Connect” to go to the dialogue box
below:
Enter the key: 88888888 and click “OK”; system will automatically
connects with your wireless network in a while.
Advanced settings provide you more powerful functions such as filter,
QoS and port range forwarding. Continue to read the “Advanced
Settings” section below if necessary.
- 26 -
Page 27 / 139
ADSL2/2+ Router
Chapter 4 Advanced Settings
Enter the setup wizard screen below and then click “Advanced
Settings” on the right top corner as shown in the figure below:
After you enter the advanced settings screen, you can set the advanced
settings for the router to satisfy your requirements. There are seven
main menus on this screen: Device Info, Advanced Setup, Wireless,
Diagnostics, Management, Exit and Back to wizard as shown in the
below picture.
- 27 -
Page 28 / 139
ADSL2/2+ Router
4.1 Device Information
There are five submenus: Summary, WAN, Statistics, Route and ARP.
Summary:
It displays system information
，
current status of WAN
connection and Wireless as shown in the figure below:
- 28 -
Page 29 / 139
ADSL2/2+ Router
WAN:
Click this menu to display the WAN information of this routing
modem: Interface, Description, Type, Igmp, NAT, Firewall, Status, IPv4
Address and vlanID as shown in the figure below:
Statistics:
It gathers the received and transmitted packets on
LAN/WAN ports.
Statistics—LAN:
It displays the received and transmitted packets of
- 29 -
Page 30 / 139
ADSL2/2+ Router
the device’s LAN ports as shown in the figure below:
Note:
eth0, eth1 and eth2 are respectively LAN port1, 2 and 3 of the
device; and wl0 is a wireless port.
Statistics—WAN:
It displays the received and transmitted packets of
the device’s WAN port as shown in the figure below:
Statistics-xDSL
:
It displays statistic information of ADSL connection
including mode, traffic type, status and other ADSL parameters as
shown in the below figure:
- 30 -
19216811.live