Page 16 / 139
Scroll up to view Page 11 - 15
ADSL2/2+ Router
4. Select” Internet Protocol Version 4(TCP/IPv4)"and then click
“Properties”.
5.
Select
“
Obtain an IP address automatically” and “Obtain DNS server
- 16 -
Page 17 / 139
ADSL2/2+ Router
address automatically”. Click “OK” to save the configurations.
Note:
Certainly you can set your IP manually, for detailed information
please refer to appendix 1
：
B.
Insert the provided CD-ROM in your PC’s drive:
If your PC does not run the CD-ROM content automatically. Open it and
run
icon, then follow the prompts.
- 17 -
Page 18 / 139
ADSL2/2+ Router
3.2Logging on to your router through Web browser
Before entering the web browser, you need to verify the connectivity
between the router and your computer.
First, click the start menu on the lower left corner of your computer
desktop.
- 18 -
Page 19 / 139
ADSL2/2+ Router
Then, input “cmd” in the search programs and file texts box and press
“enter’.
Finally, Open the dos window and enter “ping
192.168.1.1”, and press
Enter. If the screen displays the following results, it indicates your
computer has already been connected to the router.
Now the direct link between your computer and the router has been
successfully established, which means you can log on to the router’s
web-based utility.
- 19 -
Page 20 / 139
ADSL2/2+ Router
1.
Open the IE Browser as shown below.
2.
enter router’s management interface.
3.
The router’s management interface is displayed as below:
- 20 -
19216811.live