Page 36 / 135
Scroll up to view Page 31 - 35
Wireless AC1750 Dual-band Gigabit Router
35
User Name: Enter your PPTP User Name.
Password: Enter your Password.
Address mode: Select “Dynamic” if you don’t get any IP info
from your ISP, otherwise select “Static”. Con
sult your ISP if
you are not clear.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Subnet Mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.
Default Gateway: Enter the gateway provided by your ISP.
Consult your local ISP if you are not clear.
Primary/Secondary DNS Server: Enter the Primary and
Secondary DNS Server Addresses. Consult your local ISP if
you are not clear.
MPPE: Select whether to enable the MPPE authentication
method.
MTU: Maximum Transmission Unit.The factory default is
1460.
5) L2TP: Select L2TP (Layer 2 Tunneling Protocol) if your ISP
uses an L2TP connection. The L2TP connects your router to a
L2TP server. For example
：
A corporate branch and
headquarter can use this connection type to implement mutual
and secure access to each
other’s resources.
Page 37 / 135
Wireless AC1750 Dual-band Gigabit Router
36
Internet connection Type: Displays a list of available Internet
connection types.
L2TP Server: Enter the L2TP IP address provided by your
ISP.
User Name: Enter your L2TP User Name.
Password: Enter your Password.
Address mode: Select
“Dynamic” if you don’t get any IP info
from your ISP, otherwise select “Static”. Consult your ISP if
you are not clear.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Default Gateway: Enter the gateway provided by your ISP.
Page 38 / 135
Wireless AC1750 Dual-band Gigabit Router
37
Consult your local ISP if you are not clear.
Primary/Secondary DNS Server: Enter the Primary and
Secondary DNS Server Addresses. Consult your local ISP if
you are not clear.
MTU: Maximum Transmission Unit. The factory default is
1458.
PPPoE Dual Access: Select PPPoE (Point to Point Protocol
over Ethernet) Dual Access if your ISP uses a PPPoE Dual
Access connection and provides you with a PPPoE user
name and a PPPoE password. Simply enter them in
corresponding fields. In the mean time, you can also use
static address mode or dynamic address mode for MAN
access.
Internet connection Type: Displays a list of available Internet
connection types.
Page 39 / 135
Wireless AC1750 Dual-band Gigabit Router
38
User Name: Enter the PPPoE User Name provided by your
ISP. Consult your ISP if you are not clear.
Password: Enter the PPPoE Password provided by your ISP.
Consult your ISP if you are not clear.
Address mode: Select “Dynamic” if you don’t get any IP info
from your ISP, otherwise select “Static”. Consult your ISP if
you are not clear.
IP Address: Enter the IP address provided by your ISP.
Consult your local ISP if you are not clear.
Subnet mask: Enter the subnet mask provided by your ISP.
Consult your ISP if you are not clear.
Default Gateway: Enter the gateway address provided by
your ISP. Consult your local ISP if you are not clear.
MPPE: Select whether to enable the MPPE authentication
method.
MTU: Maximum Transmission Unit.The factory default is
1492.
Note:
It is not advisable to change the factory default MTU value unless
necessary as an improper MTU value may degrade your network
performance or even lead to network malfunction.
4.3 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is an
Page 40 / 135
Wireless AC1750 Dual-band Gigabit Router
39
automatic configuration protocol used on IP networks. If you
enable the built-in DHCP server on this device, it will
automatically configure TCP/IP protocol settings for all
DHCP-Client-enabled PCs
in your LAN, including IP address,
subnet mask, gateway and DNS etc.
DHCP Server: Select whether to enable or disable the
Device’s DHCP server feature.
Star
t IP: Enter the starting IP address for the DHCP server’s
IP assignment.
End IP: Enter the ending IP address for the DHCP server’s
IP assignment.
Lease Time: The length of time for the IP address lease.
Primary DNS Server: Specify a primary DNS server address
that will be assigned to DHCP clients upon request.
Secondary DNS Server: Specify a secondary DNS server
address that will be assigned to DHCP clients upon request.
19216811.live