Page 46 / 135
Scroll up to view Page 41 - 45
Wireless AC1750 Dual-band Gigabit Router
45
Group Name: Define a name for a corresponding group.
Group Description: Briefly describe a corresponding group.
IP: Displays the added IP address or an IP range;
Add IP: Enter an identical IP address or two different IP
addresses in both fields and then click Add to add a single IP
address or a range of IP addresses.
Edit: Click to edit an existing IP address or IP range.
Delete: Click to delete an existing IP address or IP range.
Clear: Click to clear all info on the page.
5.2 Time Group
Here you can set up a time group and define a name for it or
briefly describe it. A time group determines when specific rules of
other related features are to take effect.
Page 47 / 135
Wireless AC1750 Dual-band Gigabit Router
46
Group Name: Define a name for a corresponding group.
Group Description: Briefly describe a corresponding group.
To select a time or time group, simply click corresponding area.
5.3 Client Filter
To better manage PCs in LAN, you can allow or disallow
such PCs to access certain ports on Internet using the Client
Filter functionality. Before you can set up a client filter rule, you
must set an IP group and a time group.
Page 48 / 135
Wireless AC1750 Dual-band Gigabit Router
47
Filter Mode: Select Deny or Allow.
Enable: Check to enable or uncheck to disable a
corresponding filter rule
（
allow/disallow matched packets to
pass through router
）
.
Description: Briefly describe the current rule.
IP Group: Select an IP group for the corresponding rule to
apply to.
Time Group: Select a time group for the corresponding rule
to apply to.
WAN Port Range: Enter TCP/UDP protocol port number (s);
it can be a range of ports or a single port.
Protocol: Select a protocol or protocols for the traffic
(TCP/UDP/Both).
All client filter rules will be summarized in a list.
Client Filter: Check to enable the feature.
Default: Default filter mode; select Allow or Deny from the
drop-down list. For example, if Deny is selected from the
Page 49 / 135
Wireless AC1750 Dual-band Gigabit Router
48
Default drop-down list (i.e. default mode is "Deny Access to
Internet"), then all clients will be denied from accessing
Internet at any time. And if Deny is selected from the Filter
Mode drop-down list, then all clients will be denied from
accessing Internet at any time. However, if Allow is selected
from the Filter Mode drop-down list, then only clients whose
IP addresses are included in the specified IP group will be
allowed to access Internet during the time period specified
by the time group in the rule.
Example 1: To forbid PCs at the IP addresses between
192.168.0.100 and
192.168.0.150 inclusive from accessing
Internet at any time, do as follows:
Step 2. Set a time group: select "All".
Page 50 / 135
Wireless AC1750 Dual-band Gigabit Router
49
Step 3. Set a client filter rule as shown below.
Step 4. Enable the Client Filter feature and select "Allow" from
the "Default" drop-down list as shown below.
19216811.live