Page 11 / 135
Scroll up to view Page 6 - 10
Wireless AC1750 Dual-band Gigabit Router
10
WAN
Solid
WAN port connected correctly
Blinking
WAN port is transferring data
LAN
（
1/2/3
）
Solid
LAN port connected correctly
Blinking
LAN port is transferring data
IPTV
Solid
IPTV port connected correctly
Blinking
IPTV port is transferring data
2.4G
Solid
2.4G wireless radio is on
Blinking
Data being transferred over
2.4G wireless network
5G
Solid
5G wireless radio is on
Blinking
Data being transferred over 5G
wireless network
WPS
Blinking
Device is performing WPS
authentication on a client
device.
Off
WPS function is disabled or
WPS authentication
negotiation is completed
Back Panel:
Page 12 / 135
Wireless AC1750 Dual-band Gigabit Router
11
1)
USB: USB port for connection to a USB device such as a
USB printer or storage device;
2)
WAN: Internet port
（
RJ-45
）
for connection to an
Internet-enabled xDSL Modem/Cable Modem or existing
Ethernet;
3)
LAN/1/2/3: 3 LAN ports
（
RJ-45
）
for connection to PC’s NIC
or uplink to a hub, switch or wireless AP;
4)
IPTV
：
IPTV port for connection to a network set-top box.
However such port can function as a LAN port if IPTV STB
port is not enabled;
5)
WPS/Reset: WPS/Reset button; the WPS LED will display a
blinking light if you enabled the WPS function from device
web utility. Pressing this button for about 7 seconds restores
the Device to factory defaults.
2.4 Web Utility Login
The device’s default IP is
192.168.0.1. You can change it to
accommodate your own needs. Here in this manual, we use the
default IP.
Connect you PC to the Device
and config your PC’s TCP/IP
settings following instructions in appendix 1 hereto. And then do
as follows to run a Ping command to test connectivity between
your PC and the Device.
Click "Start"-> "Run", input "cmd" and press "Enter".
Page 13 / 135
Wireless AC1750 Dual-band Gigabit Router
12
see the
following screen, it means the router is reachable on your
PC. If you don’t get the following screen, verify router’s
power supply, Ethernet cable connections and your PC’s
TCP/IP settings.
Login to Web Utility
Page 14 / 135
Wireless AC1750 Dual-band Gigabit Router
13
Launch a web browser, in the address bar,input
192.168.0.1 and
press “Enter”.
When connected to the Device successfully, you shall see
the login window below. Enter user name and password in
corresponding fields on window below (Default user name and
password are respectively set to admin).
Note:
For security purpose, please change the default user name and
password after you logged in to web utility.
You will see the following interface if you entered a correct user
name and a correct password.
Page 15 / 135
Wireless AC1750 Dual-band Gigabit Router
14
2.5. Internet Connection Setup
There are 2 Internet connection types on home page: PPPoE
and DHCP.
If you used to create a broadband connection on your PC that is
directly connected to a modem and provide a user name and a
password for Internet access, then select PPPoE, enter the user
name and password and then click OK.
19216811.live