LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
63
63
VPN Type:
PPTP (with IPsec)
L2TP (with IPsec & BCP Disable/Enable)
GRE (Layer2/ Layer3) Tunnel Mode
NAT Support (except L2TP with BCP Enabled):
CPE will do network address translation
for its clients in LAN.
Default Gateway Interface (except L2TP with BCP Enabled):
Users can select which
interface as the default gateway. The default is
“
Tunnel
”
Interface.
BCP SUPPORT (Only in L2TP):
If it is enabled, CPE will bridge
“
WAN
”
,
“
Tunnel
”
and
“
LAN
”
interface together. Client in LAN side will get IP from Tunnel rather than from
CPE
’
s DHCP Server. The traffic to WAN for clients in LAN would not be directed to CPE
WAN interface. It would be directed to the gateway at the other end of the tunnel.
PPTP Server/ User/ Password (Only in PPTP):
The IP address of PPTP server and
username and password for authentication.
L2TP Server/ User/ Password (Only in L2TP):
The IP address of PPTP server and
username and password for authentication.
GRE Type(Layer 2)/ Destination IP Address:
The IP address of the peer to build GRE
tunnel with CPE.
GRE Type (Layer 3)/ Tunnel IP Address/ Subnet Mask:
The IP address of the peer to
build GRE tunnel with CPE
.
The subnet mask is used to determine the traffic sent to the
peer.
All information need in this page are assigned by
“
Tunnel Server
”
.
Like Server IP, Username and Password.
Connection Mode:
“
DHCP
”
or
“
Static
”
.
If
“
DHCP
”
mode is selected, CPE would automatically acquire configuration
information from a DHCP server.
19216811.live