1. Home
    2. /
  2. Manuals
    3. /
  3. Telrad
    4. /
  4. CPE7000 Xplornet
    5. /
  5. 11
Page 51 / 120 Scroll up to view Page 46 - 50
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
51
51
RTP Port Range Start:
Enter the starting port number of Real-time Transport Protocol
(RTP).
RTP Port Range End:
Enter the ending port number of Real-time Transport Protocol
(RTP).
Registration Expiry Time:
The valid period of registration.
Line
Setting
Common Settings
•
Enable Line 1:
Tick the checkbox to enable Line 1 VoIP service.
•
CallHold:
Users can place the call on hold if this checkbox is ticked.
•
DTMF Method:
Select Dual-tone multi-frequency signaling (DTMF) from the
drop-down list. (CPE supports In-Band, RFC2833, RFC2833_In-Band, and SIP Info.)
SIP info: key tone is indicated in the SIP packet. RFC2883: It is like SIP Info. In-Band:
treat it as voice.
•
Call Waiting: If it is enabled, when the line is busy, the user can hear the tone
that indicates a new call is coming; otherwise, there is no tone and the user
does not know a new call is coming at that time.
•
Call Forward Unconditional:
Tick the checkbox to let CPE automatically forward
Page 52 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
52
52
all calls to another phone number.
•
Call Forward Unconditional Number:
If
“
Call Forward Unconditional
”
is enabled,
enter the phone number that you
’
d like your phone call to be redirected to.
•
Call Forward Busy:
Redirects your incoming calls to another phone number when
your line is busy.
•
Call Forward Busy Number:
If
“
Call Forward Busy
”
is enabled, enter the phone
number that you
’
d like your phone call to be redirected to.
•
Call Forward Noreply:
Redirects all calls to another phone number when there is
no reply.
•
Call Forward Noreply Number:
If
“
Call Forward Noreply
”
is enabled, enter the
phone number that you
’
d like your phone call to be redirected to.
•
Call Forward No Reply Ringing:
The value defines the state
“
No Reply
”
by the
number of ringing.
•
Emergency 999:
A mapping to a real emergency phone number. This option is for
emergency use. When the user dial 999 and this call will be routed to the
emergency service.
•
Dial Plan:
Allow users to establish the expected number or pattern for a
telephone number.
Codec Setting
There are 3 codec here, when the checkbox of any of them is ticked, it is put in the
codec candidate list, and sent to the server to coordinate which codec to use. Please note that
Page 53 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
53
53
g711u, g711a do not compress the data, but g729 does. Thus, using g729 would distort the
signal.
•
g711u/g711a/g729 Codec Enable:
Tick the checkbox to enable it.
•
g711u/g711a/g729 priority:
An indicator of which codec to use first.
•
g711u/g711a/g729 Codec Ptime:
A data packet corresponds to the duration of
voice.
DSP Setting
•
Enable VAD:
Enable or disable VAD (Voice Activity Detection) for voice
transmission. When VAD is enabled, if the voice signal is smaller than a threshold,
no voice packet is transmitted.
•
Enable RTCP:
Enable or disable RTCP (Real Time Transport Protocol). This is used
to exchange control information between sender and receiver, works in
conjunction with RTP. It offers end-to-end monitoring, data delivery, and QoS.
•
Enable Echo Canceller:
Enable Echo canceller to remove echo from a voice
communication in order to improve voice quality on a telephone call.
•
JB Delay Max:
Specify the maximum jitter buffer delay in milliseconds.
•
JB DelayInit:
The size of the jitter buffer is variable, this value is its initial value.
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.
Page 54 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
54
54
Network
Display in
Brief Summary Page
Display in
“
Quick Panel
”
of
Detailed Configuration Page
Menu Structure:
Network
Status
Network Mode
DHCP Server (Not available in
Bridge
Mode)
QoS (Not available in
Bridge
Mode)
Routing (Available in R
outer
Mode)
Port Forwarding
(Available in
NAT
、
Tunnel
Mode)
Port Trigger (Available in
NAT
、
Tunnel
Mode)
DSCP
Vlan (only in ETH-CS)
MGMT Service
Page 55 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
55
55
Network | Status
LAN Information
: This section shows LAN MAC and IP address of LTE / WiMAX outdoor CPE
and statistics of TX and RX Bytes and Packets of LAN interface.
Network > Status > LAN Information
WAN Information:
This section shows WAN IP, MAC, Gateway, DNS Server, Time Server of
LTE/WiMAX outdoor CPE and statistics of TX and RX Bytes and Packets of WAN interface.
These values may differ from
“
Single PDN
”
to
“
Multiple PDN
”
, in NAT Mode with
“
Multiple
PDN enable
”
and
“
Separate
”
WAN MGMT and Data Interface, will get two WAN IP, one for
MGMT(Management packets, to CPE), one for Data(Date, transfer to LAN side).

Rate

4 / 5 based on 2 votes.

Popular Telrad Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top