Page 56 / 120
Scroll up to view Page 51 - 55
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
56
56
Network > Status > WAN Information
Lease Status Table:
This section shows all clients who get IP from DHCP server in
LTE/WiMAX indoor CPE.
Network > Status > Lease Status Table
Refresh button
Click the “
Refresh
” button to
trigger refresh manually.
Auto button
This button will update the status information periodically.
The period can be set from
“
GUI Refresh Time”
in page
Management / Device Setting
)
Page 57 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
57
57
The address and TX/RX bytes are all examples here. Real values
depend on the local ISP provider..
Network | Network Mode (NAT Mode)
Network > Network Mode
Operation Mode:
The mode includes NAT, Tunnel, Bridge and Router Mode. The
following pages will show how to configure
“
NAT mode
”
.
Changing the
“
Operation Mode
”
needs reboot to take effect. A
pop-up window will ask users to
“
Reboot
”
or
“
Continue
”
. If you select
“
Reboot
”
, CPE would reboot right away. If you select
“
Continue
”
, CPE
would not reboot automatically, you need to reboot it manually.
Page 58 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
58
58
Pop-up windows to confirm reboot
Connection Mode:
“
DHCP
”
or
“
Static
”
.
If
“
DHCP
”
mode is selected, CPE would automatically acquire configuration
information from a DHCP server.
If
“
Static
”
mode is selected, users have to manually enter the required information
in below fields.
Host Name:
currently no function.
Host Name
“
<F835DD36787F>”
Just an example here, in general, it will
be WAN MAC.
LAN IP Address / Subnet Mask:
As titled. This IP will change IP prefix in
“
DHCP Server
”
,
“
Port Forwarding
”
and
“
Port Trigger
”
WAN MGMT and DATA Interface:
Users can choose
“
Separate
”
to use different
Interface for MGMT and Data traffic, or just use
“
Combine
”
which means using same
interface for MGMT and Data.
Below are two simple pictures that describe this function.
NAT mode, choosing
“
Combine
”
in WAN MGMT and Data Interface
Page 59 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
59
59
NAT mode, choosing
“
Separate
”
in WAN MGMT and Data Interface
If users choose
“
Separate
”
in WAN MGMT and Data Interface, make
sure other PDN is well configured in page
Mobile Network >
Technology > LTE > Multiple PDN
.
WAN IP Address/ Subnet Mask/ Gateway Address:
These values are un-editable when
the connection mode is
“
DHCP
”
and editable when the mode is
“
Static
”
. If
“
Combine
”
is
selected in
“
WAN MGMT and Data Interface
”
, data and management traffic share the
same interface. If
“
Separate
”
is selected, another WAN IP address, subnet mask and
gateway address to configure data traffic will be shown.
Page 60 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
60
60
Two WAN IP, one for MGMT, other for DATA
WAN MTU:
This value is
“
Maximum
Transmission Unit”
.
The size of a single packet can
only be as large as MTU. If the size of the packet exceeds MTU, the packet would be
fragmented.
No fragmentation in bridge mode.
DNS:
Domain Name Server, editable when users select
“
Static
”
in
“Connection Mode”
.
Otherwise, DNS information will be given by DHCP server.
PDN connection CID for MGMT:
If selecting
“
Separate
”
in
“
WAN MGMT and DATA
Interface
”
, users need to assign the PDN used as MGMT. By now, the only option is
“
Default
”
.
PDN connection CID for DATA:
If selecting
“
Separate
”
in
“
WAN MGMT and DATA
19216811.live