Page 46 / 120
Scroll up to view Page 41 - 45
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
46
46
VoIP
Display in
Brief Summary Page
Display in
“
Quick Panel
”
of
Detailed Configuration Page
In VoIP main menu, users can see and tweak parameters of VoIP.
Users can set
User Name
,
User Account
,
User Password
and others in VoIP registration
process.
Menu Structure:
VoIP
Status
Basic
Advanced
Page 47 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
47
47
VoIP | Status
VoIP > Status
Users can know the status of VoIP in this page. Like Enable / Disable, Registrar Address and
Registration Status.
Line 1 / Line 2
Status
: VoIP is enabled or disabled.
UserName
: Username of Line.
Registration Status
: show a green check
if the registration is successful;
otherwise, show a red cross
.
The upper left part of the page shows
if VoIP Line 1 is registered successfully;
otherwise, it shows
.
Refresh button
Click the “
Refresh
” button to
refresh the page manually.
Auto button
This button will update the status information periodically.
(The period is controlled by
“
GUI Refresh Time”
in page
Management / Device Setting
)
Address and User Name are all examples here.
Page 48 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
48
48
VoIP | Basic
VoIP > Basic
Global Setting 1:
Select from the dropdown list
to enable “Voice Only” or “Voice & Fax”.
Line 1
Enable Line 1:
Tick the checkbox to enable VoIP.
User Name: authentication.
Enter the user name provided by your VoIP service
provider.
User Password:
Enter the user password provided by your VoIP service provider.
Confirm Password:
Enter the password again for confirmation.
User Account:
It serves as a telephone number.
Display Name:
caller name. A part of Caller ID. Caller ID is composed of display name,
telephone number, the current time. Not every device can show
“
Display Name
”
.
Regular devices should be able to show telephone number and the current time.
Page 49 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
49
49
T.38 Enable:
T.38 is an ITU-T standard for allowing transmission of fax over IP networks
in real time. Select
“
Enable
”
from the dropdown list to enable T.38. If T.38 is not
enabled, Fax is sent as voice. If the network is congested, it is suggested to use T.38.
Registration Status:
If VoIP Line 1 is registered successfully, it will show a green check
, otherwise it will show a red cross
.
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.
WiMAX / LTE outdoor CPE has two separate lines for Voip.
Page 50 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
50
50
VoIP | Advanced
VoIP > Advanced
Debug Message
Enable SIP Debug Msg:
Tick the checkbox to enable session initiation protocol
debugging; the debug message will be displayed in the console.
Enable DSP Debug Msg:
Tick the checkbox to enable digital signal processor debugging;
the debug message will be displayed in the console.
Global Setting
User Domain:
your SIP user domain.
Network Interface:
Select the network interface for SIP service.
Registrar Address:
Enter your SIP registrar address.
Registrar Port:
Enter your SIP registrar port number. (default:5060)
Outbound Proxy Address:
Enter your SIP outbound proxy address if there is a proxy
server.
Outbound Proxy Port:
Enter your SIP outbound proxy port number. (default:5060)
19216811.live