Page 76 / 120
Scroll up to view Page 71 - 75
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
76
76
Network | Port Forwarding (Available in NAT
、
Tunnel Mode)
Network > Port Forwarding
Port forwarding forwards the packet according to the port setting in this page. If packets with the
port number in these ranges, packets will be forwarded to the designated LAN IP and LAN Port.
This function is very useful when a server is set up in LAN side like FTP server.
Click
“
Add +
”
button to add a new rule, clicking
“
Delete
”
icon (
) to delete the rule.
Protocol:
TCP or UDP.
WAN Port:
The range of WAN port.
LAN Port:
The range of LAN port.
LAN IP:
Enter the IP which desires to receive forwarded packets.
Enable:
Enable/Disable the rule
Delete:
Delete the rule.
WAN Port 53
、
68
、
113
、
123
、
161
、
2948
、
7547
、
58603 are reserved
for management use.
Page 77 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
77
77
The priority of port forwarding rules is higher than DMZ.
Users can set DMZ and it will not influence port forwarding.
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.
Page 78 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
78
78
Network | Port Trigger (Available in NAT
、
Tunnel Mode)
Network > Port Trigger
The table allows you to configure Port Trigger rules. Port Trigger is a way to automate port
forwarding. Outbound traffic on predetermined ports ('trigger port') causes inbound traffic to
specific ports (call it port
P
here) to be dynamically forwarded to the host which uses trigger port.
Port
P
does not open if port triggering is not activated. Click
“
Add +
”
button to add a new rule,
clicking
“
Delete
”
icon (
) to delete the rule.
Application Name:
Name of the port trigger rule.
Triggered Range:
Traffic passing through
t
he port in the triggered range would
automatically open the forwarded port in the forwarded range.
The ports in the triggered
range are LAN ones.
Forwarded Range:
The ports that would be automatically opened when traffic pass
Page 79 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
79
79
through ports in the triggered range.
The ports in the triggered range are WAN port.
Enable:
Enable/Disable the rule.
Delete:
Delete the rule.
Cancel button
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.
Page 80 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
80
80
Network | DSCP
MGMT DSCP ID:
UL DSCP that LTE / WiMAX outdoor CPE mark the management packets.
Data DSCP ID:
UL DSCP that LTE / WiMAX outdoor CPE mark the data packets.
VoIP SIP DSCP ID:
UL DSCP that LTE / WiMAX outdoor CPE mark the VoIP SIP packets.
VoIP RTP DSCP ID:
UL DSCP that LTE / WiMAX outdoor CPE mark the VoIP RTP packets.
VoIP RTCP DSCP ID:
UL DSCP that LTE / WiMAX outdoor CPE mark the VoIP RTCP packets.
DSCP 0,6,26,46 are examples.
19216811.live