LTE/WiMAX DM Outdoor | User Manual

81

81

Cancel button

Reset fields to the last saved values.

Apply button

Commit the changes made and save to the CPE device, some

services will be reloaded.

Network | Vlan (available in ETH-CS only)

In ETH-CS mode the LTE / WiMAX outdoor CPE has 3 interfaces.

Management, data and VoIP;

Enable MGMT VLAN:

this option allow configuring MGMT Vlan ID and Vlan priority. The

interface is layer 2 (Vlan-cs).

Enable DATA VLAN:

this option allow configuring DATA Vlan ID and Vlan priority. The

interface is layer 2 (Vlan-cs).

If this option is disable it means that LET / WIMAX outdoor

CPE delivers the packets as is (transparent), if this option is enable it means that the CPE

LTE/WiMAX DM Outdoor | User Manual

82

82

retag the Vlan to untag packet (on LAN side). The interface is layer 2 (Vlan-cs).

There is

no option to use untag and transparent in same time

.

Enable VoIP VLAN:

this option allow configuring VoIP Vlan ID and Vlan priority. The

interface is layer 2 (Vlan-cs).

Vlan 100, 200, 300 are examples.

Cancel button

Reset fields to the last saved values.

Apply button

Commit the changes made and save to the CPE device, some

services will be reloaded.

Network | Dynamic DNS

Network > Dynamic DNS

LTE/WiMAX DM Outdoor | User Manual

83

83

Dynamic Domain Name System (DDNS) is a mechanism that can map a fixed domain name to a

dynamic IP address. This is very useful when you can only get a dynamic IP in WAN. If DDNS is

enabled, clients can connect to CPE through

“

DDNS Host Name

”

.

Enable DDNS:

Enable/Disable DDNS.

When DDNS is enabled,

select the DDNS service provider you registered from the

drop-down list, and configure the following parameters:

DDNS Service Provider

,

DDNS User

Name

,

DDNS Password

, and

DDNS Host Name

.

Cancel button

Reset fields to the last saved values.

Apply button

Commit the changes made and save to the CPE device, some

services will be reloaded.

LTE/WiMAX DM Outdoor | User Manual

84

84

Network | MGMT Service

Network > MGMT Service

MGMT service is about HTTP and HTTPs configuration.

HTTP Service:

When it is enabled, clients in the LAN side can link to CPE HTTP service. Users

can set the port used by HTTP service.

HTTPs Service:

When it is enabled, clients in the LAN can link to CPE HTTPs service. Users

can set the port used by HTTPs service. Clients in the WAN side are able to link to CPE HTTPs

service when

“

HTTPs service

”

is on and

“

allow HTTPs login from WAN

”

in firewall section is

on. Please note that the clients in LAN and WAN may use different ports to link to CPE

HTTPs service.

Import WEB Certificate:

The certificate is used by HTTPs service, users can upload the

certificate and prepare the passphrase for CPE and view the current certificate through view

button.

LTE/WiMAX DM Outdoor | User Manual

85

85

The port number setting in this page is only for LAN; if users want to

login to GUI from WAN, it needs to enable

“

Allow Https login from

WAN

”

in

“

Firewall | Basic

”

.

Cancel button

Reset fields to the last saved values.

Apply button

Commit the changes made and save to the CPE device, some

services will be reloaded.