Page 101 / 120
Scroll up to view Page 96 - 100
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
101
101
Management | Restore Default
Management > Restore Default
Select
Management > Restore
Default
to go back to the factory default settings.
Restore Default:
Click
“
Restore
”
button to
clear all users’ configuration and restore to
factory default settings.
Restore to default settings Window
Last Good Configuration
.
Save Last Good:
Save the current configuration.
Page 102 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
102
102
Remove Last Good:
Remove the last saved configuration.
Reset to Last Good:
Load the last saved configuration.
Integrity Check:
Integrity check for the software used in the device in case the storage
device is broken
.
The green check
indicates the investigation is passed.
Integrity Check Windo
w
Rollback Settings:
CPE saves two firmware with possible of different versions in CPE. CPE
would choose one of them. Users can press rollback to switch to use another firmware. A
“
Rollback confirming
”
window pops up and then starts rebooting to have change taken
effect.
Rollback confirmation window
Rebooting window
Page 103 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
103
103
Management | Software
Management > Software
Software Upgrade:
Click
“
Browse
”
button to select the ipkg file to upload, and then click
“
Upgrade
”
to install the selected file. The Upgrading window will be shown as below and
then the reboot process will be started to let the change taken effect. The ipkg file you have
uploaded will be shown in the table below the device software version.
Management > Software > Upgrading Window
After pressing the “Upgrade” button, it will automatically reboot the
CPE and upgrade the firmware with the specified file. You will be
Page 104 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
104
104
prompted to re-login to the CPE after the upgrade is complete.
Configuration Backup:
Back up the current system configuration by clicking
“
Save
”
button.
File Download Window
If user wants to restore the system to the restore the configuration, click
“
Browse
”
button
to select the previously saved configuration file, and then click
“
Restore
”
button to restore
the system to the previous settings.
Management > Software > Upgrading Window
A window will be popped up to let users to key in the passphrase
when users save/restore the configuration. Please note that the
entered passphrases need to be consistent when users do
save/restore process.
Page 105 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
105
105
Enter Passphrase Window
Press
the “
Restore
” button,
CPE will automatically reboot and adjust
the configuration with the uploaded file. Users will be prompted to
re-login to the CPE after the process is complete.
Management | RM Settings
Management > RM Settings(Disable)
In this page, users can set up the remote management.
RM Type-Disable:
Select
“
Disable
”
to disable the remote management.
RM Type-SNMP (Simple Network Management Protocol)
19216811.live