1. Home
    2. /
  2. Manuals
    3. /
  3. Telrad
    4. /
  4. CPE7000 Xplornet
    5. /
  5. 22
Page 106 / 120 Scroll up to view Page 101 - 105
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
106
106
Management > RM Settings(SNMP)
For SNMP, CPE serves as server; users can use the tool such as MIB browser as the client to
connect to CPE and do remove control.
SNMP Server:
The type of the server. It includes SNMPv2c, SNMPv3.
SNMP MIBS Version:
1.4.2
SNMP Read-Only Community (SNMPv2 only):
The “SNMP Community string” is like a
user id or password that allows access to a router's or other device's statistics. If the
community string is correct, the server responds with the requested information.
SNMP Read-Write Community (SNMPv2 only):
The “SNMP Community string” is
like a
user id or password that allows access to a router's or other device's statistics. If the
community string is correct, the server responds with the requested information.
SNMP Trap (SNMPv2 only):
A way for an agent to send an asynchronous notification to
the trap server. The traps that an agent can generate are defined by the MIBs it supports.
SNMP Trap Community (SNMPv2 only):
The “SNMP Community string” is like a user id or
password that allows access to a router's or other device's statistics. If the community
Page 107 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
107
107
string is correct, the server responds with the requested information.
SNMP Trap Server IP Address:
As titled.
SNMP Trap Server Port:
As titled.
Contact:
The name or organization responsible for the switch.
System Name:
The name that identifies the SNMP agent.
Location:
A location for the SNMP Agent.
Latitude:
A part of geo-location attributes.
Longitude:
A part of geo-location attributes.
Height:
A part of geo-location attributes.
Reboot Requirement:
A remainder to let users know that CPE needs to reboot to have
something taken effect.
SNMP Access from LAN: Enable/Disable.
SNMP Access Domain: Enable/Disable.
SNMP Access Domain IP Address:
The IP address of the access domain.
SNMP Access Domain Netmask:
The subnet mask for the access domain.
SNMP Engine ID (SNMPv3 only):
A unique identifier for the agent.
SNMP Engine Boots (SNMPv3 only):
A count of the number of times the SNMP engine
has re-booted/re-initialized since snmpEngineID was last configured.
SNMP Engine Time (SNMPv3 only):
The number of seconds since the snmpEngineBoots
counter was last incremented
Trap Receiver Table (SNMPv3 only):
Page 108 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
108
108
Group Access Table (SNMPv3 only):
SNMP Engine Table (SNMPv3 only):
Page 109 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
109
109
RM Type-TR-069 (Technical Report 069)
Management > RM Settings(TR-069)
TR-069 is a technical specification entitled CPE WAN Management Protocol (CWMP). It
defines an application layer protocol for remote management of end-user devices. In the
following, the word ACS stands for Auto Configuration Server.
ACS URL Source:
It includes
“
Options 43 first
”
and
“
Only from WEB GUI
”
. If users
select
“
Options 43 first
”
and CPE would get the ACS URL from the DHCP server if
possible. Otherwise, CPE would take the URL provided by the users.
ACS URL:
The URL or IP address of the ACS.
ACS Username:
The username for authentication when CPE connects to ACS. (20
alphanumeric characters allowed)
ACS Password:
The password for authentication when CPE connects to ACS. (20
alphanumeric characters allowed)
Page 110 / 120
LTE/WiMAX DM Outdoor | User Manual
Dual Mode CPE7000 Manual
110
110
Enable Periodical Inform:
Enable/Disable CPE to ask ACS periodically for configuration
update.
Periodical Inform Interval:
The period to update the configuration if the
“
Enable
Periodical Inform
”
is enabled.
Connection Request Username:
When ACS connects to CPE, CPE also needs to
challenge ACS for authentication. ACS has to provide the username which matches this
field. (20 alphanumeric characters allowed)
Connection Request Password:
When ACS connects to CPE, CPE also needs to
challenge ACS for authentication. ACS has to send the password which matches this
field. (20 alphanumeric characters allowed)
If ACS does provisioning, there is no need for users to set connection request
username/password because ACS would send that to users.

Rate

4 / 5 based on 2 votes.

Popular Telrad Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top