Page 96 / 140
Scroll up to view Page 91 - 95
5 - Configuring your Residential Gateway
SAGEM F@st™ 3202 Reference Manual- 288060387-01
Page 5-48
Reproduction and communication prohibited without the written permission of
E
5.6.3.4
Spanning Tree
Object:
This protocol uses an algorithm that can be used to calculate the best route for the
data with least cost (without looping through the network).
1) Bridging
Click in the
Network
menu, then select the
Spanning Tree
submenu from the drop-
down list followed by the
Bridging
tab.
The screen opposite appears and displays
a list of the "Spanning Tree" entries.
Field
Meaning
Port
Port number.
Status
Port status:
Blocking
,
Listening
,
Learning
,
Forwarding
and
Disabled
.
Port Id
Identifier (MAC address) of the port (value from 0 to 6500).
Link cost
Cost of the link.
Tx CBpdu
Rx CBpdu
Tx TBpdu
Rx TBpdu
Page 97 / 140
5 - Configuring your Residential Gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 5-49
"STP parameters" button
Click
to display
the Spanning Tree protocol parameters.
The screen opposite appears.
Field
Meaning
STP
Status of the "Spanning Tree" protocol (Activated: In Service,
Deactivated: Out of Service).
Ports active
Number of ports active.
Bridge Id
Unique identifier (MAC address) of the bridge.
Root Id
MAC address of the bridge elected for Root, in the network
topology.
Hello Time
Time during which a supervision mechanism is activated. This
value is expressed in seconds (2 or 3 seconds normally).
Maximum age
Routing delay
Routing delay.
Root port
Port of the bridge chosen for Root, in the network topology.
Root Path Lost
Holding time
Page 98 / 140
5 - Configuring your Residential Gateway
SAGEM F@st™ 3202 Reference Manual- 288060387-01
Page 5-50
Reproduction and communication prohibited without the written permission of
E
"Configure port" button
Click
to configure the
port.
The screen opposite appears.
Field
Meaning
Default setting
Port parameters
Interface name
Select the name of the interface from the
drop-down list (Eth0, atmx).
Eth0
Link cost
Enter a value from 0 to 65535.
_
Port priority
Enter a value from 0 to 255.
_
Bridge parameters
Bridge priority
Enter a value from 0 to 65 000
32 768
Hello Time
Time for which a surveillance mechanism
is activated. This value is expressed in
seconds.
Enter a value from 1 to 10 seconds (2 or
3 seconds normally).
2
Maximum age
Enter a
Maximum age
value from 1 to
60.
20
Passage delay priority
Time for a port spent in the learning and
listening state expressed in seconds
(value from 10 to 200).
15
To confirm a value entered in one of the four "Bridge parameters" fields by
, you must check the appropriate box.
Page 99 / 140
5 - Configuring your Residential Gateway
SAGEM F@st™ 3202 Reference Manual - 288060387-01
Reproduction and communication prohibited without the written permission of
E
Page 5-51
2) MAC filtering
Click in the
Network
menu, then select the
Spanning Tree
submenu from the drop-
down list followed by the
MAC filtering
tab.
The screen opposite appears.
"Add" button
Click
to add a destination.
The screen opposite appears.
Field
Meaning
Default setting
Port name
Select the name of the port from the
drop-down list (eth0, atmx).
eth0
Source MAC
Check the box to select the source
MAC address.
_
Destination MAC
Check
the
box
to
select
the
destination MAC address.
_
MAC value
Enter the destination MAC address.
_
Bilateral MAC
Check the box to select the bilateral
MAC
address
(source
and
destination).
_
Ethernet protocol type
Check the box to select the Ethernet
protocol type.
_
Ethernet protocol type
Select the Ethernet protocol type
from the drop-down list.
Address
Resolution
Protocol (ARP)
Acceptance criterion
Select Allow or Delete from the drop-
down list.
Allow
Page 100 / 140
5 - Configuring your Residential Gateway
SAGEM F@st™ 3202 Reference Manual- 288060387-01
Page 5-52
Reproduction and communication prohibited without the written permission of
E
"DeleteFilter" button
Click
to delete a
filter for a particular port.
The screen opposite appears.
Field
Meaning
Default setting
Port name
Select the name of the port (eth0,
atmx) by checking the box in the
corresponding
Selection
field.
_
Click the
button to actually delete the filter chosen according to the port criteria (eth0,
atmx).
19216811.live