Sagem Livebox-2 Router Manual PDF (Setup & Configuration Guide)

Page 86 / 140 Scroll up to view Page 81 - 85

5 - Configuring your Residential Gateway

SAGEM F@st™ 3202 Reference Manual- 288060387-01

Page 5-38

Reproduction and communication prohibited without the written permission of

E

"List" button

First

Select

a receive interface and a transmit interface then click

List

to display a list of the

IP filters configured for the selected interfaces.

Click

List

to display a list of the IP filters

configured and the screen opposite

appears.

To obtain a

list of all the interfaces

, select

All

.

Deactivate Firewall button

Click this button to deactivate the firewall; the button then shows Activate Firewall. Click this

button to activate the firewall.

Default Policy button

Click this button to restore the default settings for the filtered datagrams.

Page 87 / 140

5 - Configuring your Residential Gateway

SAGEM F@st™ 3202 Reference Manual - 288060387-01

Reproduction and communication prohibited without the written permission of

E

Page 5-39

5.6.2.3

NAT

NAT is a configurable IP address translation function which will be applied to the Residential

Gateway interfaces that you will have activated for this function.

A number of configurations of the translation function, the NAT actions, can be set up and can

be activated as indicated in section 2) below.

1) NAT public address

Click in the

Firewall

menu, then select the

NAT

submenu from the drop-down list

followed by the

NAT public address

tab.

The screen opposite displays a list of the

public addresses of the NAT interface.

"Add" button

Click the

button to add NAT public

addresses.

Field

Meaning

Public address

Enter a static WAN address.

Page 88 / 140

5 - Configuring your Residential Gateway

SAGEM F@st™ 3202 Reference Manual- 288060387-01

Page 5-40

Reproduction and communication prohibited without the written permission of

E

2) Policy based on NAT

Click in the

Firewall

menu, then select the

NAT

submenu from the drop-down list and

then select the

Policy based on NAT

tab.

The screen opposite displays a list of the

actions.

"Add" button

Click the

button to add an NAT

action to a static address.

Field

Meaning

Default setting

Static NAT

Originating static NAT address

Enter an originating static NAT address.

Not selected

Terminating static NAT address

Enter a terminating static NAT address.

Not selected

Redirected address

Originating redirected address

Enter an originating redirected

address.

_

Terminating redirected address

Enter a terminating redirected address.

_

Redirected port

Originating redirected port

Enter an originating redirected port.

_

Terminating redirected port

Enter a terminating redirected port.

_

"Enable / Disable" button

Button

Meaning

Click this button to enable a selected NAT action.

Click this button to disable a selected NAT action.

Page 89 / 140

5 - Configuring your Residential Gateway

SAGEM F@st™ 3202 Reference Manual - 288060387-01

Reproduction and communication prohibited without the written permission of

E

Page 5-41

3) NAT interfaces

Click in the

Firewall

menu, then select the

NAT

submenu from the drop-down list

followed by the

NAT interfaces

tab.

The screen opposite displays a list of the

static NAT entries configured. A static NAT

entry is used to translate all the addresses

of a local address range (source address)

into a public address.

Click in the

selection

column, on the line

corresponding to the interface for which

you want to modify the NAT state.

"Enable / Disable" button

Button

Meaning

Click this button to apply the IP/NAT address translation function to the

interface that you previously selected (ethx, ph0, vifx, wlan0,bth0,

usb0, atmx and pppx).

Click this button to deactivate NAT on an interface (ethx, ph0, vifx,

wlan0,bth0, usb0, atmx and pppx).

To

enable

or

disable

NAT on an interface, you must select it by checking the

appropriate box in the

selection

column.

Page 90 / 140

5 - Configuring your Residential Gateway

SAGEM F@st™ 3202 Reference Manual- 288060387-01

Page 5-42

Reproduction and communication prohibited without the written permission of

E

5.6.2.4

Traces

1) Recorder

Click in the

Firewall

menu, then select the

Traces

submenu from the drop-down list

followed by the

Recorder

tab.

The screen opposite appears.

"Add" button

Click

to configure a recorder.

The screen opposite appears.

Field

Meaning

Default setting

Equipment

Select equipment from the drop-down

list.

By selecting one

Severity

Select a severity from the drop-down

list.

By selecting one

Destination ID

Enter a destination identifier.

By selecting one

Rate

Popular Sagem Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share