Page 41 / 202
Scroll up to view Page 36 - 40
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-5
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.3
ADSL connection status
Refer to subsection 5.5.1 –
Device Info/Summary
.
5.4
Display frame
The router’s activity status is always visible at the top right corner of the HTTP configuration
tool.
You can perform the following actions:
•
click on
Refresh
to update the data displayed
•
click on
Reboot
to restart your router
ADSL information
The following table presents the possible states of the
ADSL
field:
Status
Meaning
Green
ADSL line synchronised
Yellow
ADSL line synchronising
Red
ADSL line not connected
The
Down
field displays the nominal downlink bit rate.
The
Up
field displays the nominal uplink bit rate.
Internet information
The following table presents the possible states of the
Internet
field:
Status
Status
Meaning
ADSL Down
ADSL line not connected or not activated
Not configured
The Internet account must be configured
Off
Router rebooting
Router is rebooting
Green
Connected
The Internet account is configured
Yellow
Waiting for ISP
ADSL line synchronising
Red
Access denied
Incorrect Internet account
Page 42 / 202
5 - Information / Configuration
Page 5-6
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.5
Device Info
Clicking on this heading displays the following menus:
•
Summary (see subsection 5.5.1)
•
WAN (see subsection 5.5.2)
•
Statistics (see subsection 5.5.3)
•
Route (see subsection 5.5.4)
•
ARP (see subsection 5.5.5)
•
DHCP (see subsection 5.5.6)
5.5.1
Summary
Object:
This menu lets you display the current status of your Internet connection.
•
In the
Device Info
menu, select
Summary
.
The following screen opens:
Note
This screen also appears in the welcome screen (see subsection 5.1).
Page 43 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-7
Sagem Communications SAS
document. Reproduction and disclosure prohibited
The following table provides the meaning of the different fields which are displayed.
Field
Meaning
Software Version
Software version currently installed.
Line Rate - Upstream (kbps)
Nominal up line rate
Line Rate - Downstream (kbps)
Nominal down line rate
LAN IPv4 Address
Local network IPv4 address (LAN)
WAN IPv4 Address
Remote network IPv4 address (WAN)
Default Gateway
Default gateway address
Primary DNS Server
Primary DNS server address
Secondary DNS Server
Secondary DNS server address
LAN IPv6 Address
Local network IPv6 address (LAN)
Default IPv6 Gateway
Default IPv6 gateway address
Date / Time
Date and Time (see Note)
Note
The
Date/Time
field only appears if the "
Automatically synchronize with
Internet time servers
" box is checked in the "
Management / Internet Time
"
menu (see subsection 5.10.4).
5.5.2
WAN
Object:
This menu is used to display all the parameters which concern the remote network.
•
In the
Device Info
menu, select
WAN
.
The following screen opens:
Page 44 / 202
5 - Information / Configuration
Page 5-8
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.5.3
Statistics
Object:
This menu is used to display all the router's statistics.
This menu contains the following four sub menus:
•
LAN (see subsection 5.5.3.1),
•
WAN Service (see subsection 5.5.3.2),
•
xTM (see subsection 5.5.3.3),
•
xDSL (see subsection 5.5.3.4).
5.5.3.1
LAN
Object:
This menu is used to display all the parameters which concern the local network
(LAN).
•
In the
Device Info
menu, select
Statistics
then select
LAN
.
The following screen opens:
•
Click on the
Reset Statistics
button to reset statistics.
Page 45 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-9
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.5.3.2
WAN Service
Object:
This menu is used to display all the parameters which concern the remote network
(WAN).
•
In the
Device Info
menu, select
Statistics
then select
WAN Service
.
The following screen opens:
•
Click on the
Reset Statistics
button to reset statistics.
19216811.live