Page 21 / 202
Scroll up to view Page 16 - 20
2 - Description and connection of your router
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page
2-5
Sagem Communications SAS
document. Reproduction and disclosure prohibited
2.2
Connecting the ports of your router
Figure 2.2 - Interconnection of ports of SAGEM F@st
TM
1704
Page 22 / 202
2 - Description and connection of router
Page 2-6
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
2.3
Installing your SAGEM F@st
TM
1704
2.3.1
Powering up
1.
First connect the end of the mains adapter lead, supplied with the equipment, to the Power
socket on your router.
2.
Connect the other end of the mains adapter lead to a nearby power outlet.
3.
The router switches on.
4.
The
LED will light up first, followed by the four Ethernet LEDs (1 to 4), then these last
four LEDs will be off. The
and Ethernet (which corresponds to the connected interface)
LEDs should be steady and the
LED blinks during the establishment of the ADSL link,
then steadies like the
LED. The
LED should be steady and turn from "Red" to
"Green" when a PPP session has been created.
Note
The powering up process lasts around one minute.
2.3.2
Connecting the ADSL cable
1.
Connect one end of the RJ11/RJ11 cable supplied with the equipment to the LINE socket of
your router.
2.
Connect the other end of the cable as shown in the Figure 2.3.
Page 23 / 202
2 - Description and connection of your router
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page
2-7
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Figure 2.3 - ADSL line / Power Supply Connection
Page 24 / 202
2 - Description and connection of router
Page 2-8
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
2.3.3
Connecting to your computer
Two connections may need to be made:
•
Connection of the Ethernet interface of your router to your computer.
•
Connection of the WLAN (Wi-Fi) interface to your computer.
2.3.3.1 Connecting the Ethernet interface of your router to your computer
1.
Connect the end of the yellow Ethernet cable (RJ45/RJ45) supplied in the pack to the
Ethernet fixed connector (marked
LAN1, LAN2
,
LAN3
or
LAN4
) of your router.
2.
Connect the other end of the cable to your computer.
Page 25 / 202
2 - Description and connection of your router
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page
2-9
Sagem Communications SAS
document. Reproduction and disclosure prohibited
2.3.3.2 Connecting the Wi-Fi interface of your router to
your computer
Wireless linking enables the router to be connected to your computer.
To make this connection you must have a Wi-Fi pack (option). This pack comprises the
following elements:
•
1 Wi-Fi 188470912 key (Dongle) in an anti-static plastic bag,
•
1 CD-ROM.
Inserting a USB Wi-Fi key in your computer
This key should only be
connected
to your computer
during installation
of the Wi-Fi drivers
(standard 802.11b/g)(see Quick Installation Guide).
Note
You can also use the Wi-Fi adapter incorporated in your computer.
19216811.live