Page 151 / 202
Scroll up to view Page 146 - 150
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-115
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.10.1.2
Update
Object:
This menu enables the router to recover a configuration which has already been
saved to a file with a .conf extension.
•
In the
Management
menu, select
Settings
then
Update
.
The following screen opens:
Proceed as follows for your router configurer to display a configuration which has already been
saved:
•
Enter the path then the name of the configuration file.
or
•
Click on the
Browse
button and select the path then the configuration file.
•
Select the configuration file then click on the
Update Settings
button to recover a
configuration which has already been saved.
Note
The process takes around 2 minutes.
Page 152 / 202
5 - Information / Configuration
Page 5-116
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.10.1.3
Restore Default
Object:
This menu is used to return to factory configuration.
Important
The existing configuration is completely overwritten.
•
In the
Management
menu, select
Settings
then
Restore Default
.
The following screen opens:
•
Click on the
Restore Default Settings
button; the following screen appears:
•
Click on the
OK
button if you really want to return to the factory configuration.
Note
All the LEDs go off except for the green “WLAN” - if the wired network is
activated; the green POWER LED then all the LEDs and the process for
returning to the factory configuration starts. It lasts for around 2 minutes.
Once the restore performed, the
Internet Connection
menu appears. Refer to paragraph 5.6.
Page 153 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-117
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.10.2
System Log
Object:
This menu is used to view and/or configure the events which occur on your router.
•
In the
Management
menu, select
System Log
.
The following screen opens:
5.10.2.1
View System Log
•
Click on the
View System Log
button to display the events with the severity you configured
(see table in section
Configure System Log
).
Page 154 / 202
5 - Information / Configuration
Page 5-118
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.10.2.2
Configure System Log
•
Click on the
Configure System Log
button to configure the events which occur on your
router.
Field
Action
Default
value
Log
Select
Enable
to activate the saving of all the events to a log
and display on screen or
Disable
to deactivate.
Disable
Log Level
Select the appropriate severity from the scroll down list.
All the events with this severity, or a higher severity, will be
saved to your router's volatile "flash" memory.
The severities are classified in decreasing order of importance.
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Informational
•
Debugging
Debugging
Display Level
Select the appropriate severity from the scroll down list. All the
events with this severity, or a higher severity, can be viewed by
pressing the
View System Log
button.
The displayed events are classified in decreasing order of
importance.
Error
Page 155 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-119
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Field
Action
Default
value
Mode
Select the destination ID from the scroll down list:
•
Local
: All the events are returned to your router via a
"Buffer" memory.
•
Remote
: All the events are returned to the "Syslog" server.
•
Both
: Both modes.
Local
Server IP
Address
17
Enter the IP address of the "Syslog" address on which all the
events will be saved.
0.0.0.0
Server UDP
Port
17
Enter the number of the port associated with the "Syslog"
server.
514
17
These fields only appear when the mode selected is "Remote or "Both".
19216811.live