Page 136 / 202
                                                    Scroll up to view Page 131 - 135
                                                
                    
5 - Information / Configuration 
Page 5-100
SAGEM F@st™ 1704 Reference Manual - 253272861-A 
Sagem Communications SAS
document. Reproduction and disclosure prohibited 
WPA 
Object:
This encryption mode applies the functionalities of the WPA protocol and requires the 
use of a "RADIUS" authentication server. 
•
Select the 
WPA
security from the scroll down list; the following screen appears: 
Field 
Action/Meaning 
Default value 
WPA Group Rekey 
Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
regenerated (Renewing) in broadcast / 
multicast (LAN broadcast). 
0 
RADIUS Server IP 
Address 
Enter the IP address of the "RADIUS" 
authentication server. 
0.0.0.0 
RADIUS Port 
Enter the port used for the "RADIUS" 
authentication server. 
1812 
RADIUS Key 
Enter the secret key shared between the 
authentication server and its clients 
- 
WPA Encryption 
Select the WPA encryption required from the 
scroll down list: 
•
TKIP (
T
emporal 
K
ey 
I
ntegration 
P
rotocol) 
•
AES (
A
dvanced 
E
ncryption 
S
tandard) 
•
TKIP+ AES 
TKIP 
WEP Encryption 
Select from the scroll down list: 
•
Disabled
to use WPA encryption only. 
•
Enabled
to use both WPA and WEP 
encryption. 
Disabled 
 
                 
                                
                    
                        Page 137 / 202
                                            
                    
5 - Information / Configuration 
SAGEM F@st™ 1704 Reference Manual - 253272861-A 
Page 5-101
Sagem Communications SAS
document. Reproduction and disclosure prohibited 
WPA-PSK 
Object:
This encryption mode applies the functionalities of the WPA protocol with a pre-shared 
key, but does not require an authentication server. The key is regenerated after a 
period which can be configured (
WPA Group Rekey Interval
). 
•
Select the 
WPA-PSK
security from the scroll down list; the following screen appears: 
Field 
Action/Meaning 
Default value 
WPA Pre-Shared Key 
Enter the secret shared key. This may contain 
8 to 63 ASCII characters or 64 hexadecimal 
symbols (256 bits). 
Click on the 
Save/Apply
button to validate the 
entry. 
Note:
You may display your secret phrase 
by clicking on 
Click here to display
. 
- 
WPA Group Rekey 
Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
regenerated (Renewing) in broadcast / 
multicast (LAN broadcast). 
0 
WPA Encryption 
Select the WPA encryption required from the 
scroll down list: 
•
TKIP (
T
emporal 
K
ey 
I
ntegration 
P
rotocol) 
•
AES (
A
dvanced 
E
ncryption 
S
tandard) 
•
TKIP+ AES 
TKIP 
WEP Encryption 
Select from the scroll down list: 
•
Disabled
to use WPA encryption only. 
•
Enabled
to use both WPA and WEP 
encryption. 
Disabled 
 
                 
                                
                    
                        Page 138 / 202
                                            
                    
5 - Information / Configuration 
Page 5-102
SAGEM F@st™ 1704 Reference Manual - 253272861-A 
Sagem Communications SAS
document. Reproduction and disclosure prohibited 
WPA2 
Object:
This encryption mode applies the functionalities of the WPA2 protocol and requires 
the use of a "RADIUS" authentication server. 
•
Select 
the 
WPA2
security 
from 
the 
scroll 
down 
list; 
the 
following 
screen 
appears: 
Field 
Action/Meaning 
Default value 
WPA2 Re-auth Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
certified. 
36000 
WPA Group Rekey 
Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
regenerated (Renewing) in broadcast / 
multicast (LAN broadcast). 
0 
RADIUS Server IP 
Address 
Enter the IP address of the "RADIUS" 
authentication server. 
0.0.0.0 
RADIUS Port 
Enter the port used by the "RADIUS" 
authentication server. 
1812 
RADIUS Key 
Enter the secret key shared between the 
authentication server and its clients. 
- 
WPA Encryption 
Select the WPA encryption required from the 
scroll down list: 
•
TKIP (
T
emporal 
K
ey 
I
ntegration 
P
rotocol) 
•
AES (
A
dvanced 
E
ncryption 
S
tandard) 
•
TKIP+ AES 
AES 
WEP Encryption 
Select from the scroll down list: 
•
Disabled
to use WPA encryption only. 
•
Enabled
to use both WPA and WEP 
encryption. 
Disabled 
 
                 
                                
                    
                        Page 139 / 202
                                            
                    
5 - Information / Configuration 
SAGEM F@st™ 1704 Reference Manual - 253272861-A 
Page 5-103
Sagem Communications SAS
document. Reproduction and disclosure prohibited 
WPA2-PSK 
Object:
This encryption mode uses the WPA2 protocol with a pre-shared key, but does not 
require an authentication server. 
The key is regenerated after a period which can be 
configured (
WPA Group Rekey Interval
). 
•
Select the 
WPA2-PSK
security from the scroll down list; the following screen 
appears: 
Field 
Action/Meaning 
Default value 
WPA2 Pre-Shared Key 
Enter a secret phrase. This may contain 8 to 
63 ASCII characters or 64 hexadecimal 
symbols (256 bits). 
Click on the 
Save/Apply
button to validate the 
entry. 
Note:
You may display your secret phrase 
by clicking on 
Click here to display
. 
- 
WPA Group Rekey 
Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
regenerated (Renewing) in broadcast / 
multicast (LAN broadcast). 
0 
WPA Encryption 
Select the WPA encryption required from the 
scroll down list: 
•
TKIP (
T
emporal 
K
ey 
I
ntegration 
P
rotocol) 
•
AES (
A
dvanced 
E
ncryption 
S
tandard) 
•
TKIP+ AES 
AES 
WEP Encryption 
Select from the scroll down list: 
•
Disabled
to use WPA encryption only. 
•
Enabled
to use both WPA and WEP 
encryption. 
Disabled 
 
                 
                                
                    
                        Page 140 / 202
                                            
                    
5 - Information / Configuration 
Page 5-104
SAGEM F@st™ 1704 Reference Manual - 253272861-A 
Sagem Communications SAS
document. Reproduction and disclosure prohibited 
Mixed WPA2/WPA 
Object:
This encryption mode applies the functionalities of the WPA2 and WPA protocols. 
It 
needs a "RADIUS" authentication server. 
•
Select the 
Mixed WPA2/WPA
security from the scroll down list; the following screen 
appears: 
Field 
Action/Meaning 
Default value 
Network Re-auth 
Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
certified. 
36000 
WPA Group Rekey 
Interval 
Enter a value (in seconds) which determines 
the period after which the WPA key will be 
regenerated (Renewing) in broadcast / 
multicast (LAN broadcast). 
0 
RADIUS Server IP 
Address 
Enter the IP address of the "RADIUS" 
authentication server. 
0.0.0.0 
RADIUS Port 
Enter the port used by the "RADIUS" 
authentication server. 
1812 
RADIUS Key 
Enter the secret key shared between the 
authentication server and its clients. 
- 
WPA Encryption 
Select the WPA encryption required from the 
scroll down list: 
•
TKIP (
T
emporal 
K
ey 
I
ntegration 
P
rotocol) 
•
AES (
A
dvanced 
E
ncryption 
S
tandard) 
•
TKIP+ AES 
TKIP+ AES 
WEP Encryption 
Select from the scroll down list: 
•
Disabled
to use WPA encryption only. 
•
Enabled
to use both WPA and WEP 
encryption. 
Disabled