5 - Information / Configuration

Page 5-40

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.2.6

IP over ATM (IPoA)

Field

Action

Default

value

Enter Service description

Displays the name of the service being

configured. This name, which is allocated

automatically, is made up as follows:

Protocol_VPI_ Index _ VCI

For example: ipoa_0_0_35.

Note:

You may enter another service name.

ipoa_0_0_35

•

Click on the

Next

button to continue configuring the WAN service.

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-41

Sagem Communications SAS

document. Reproduction and disclosure prohibited

Field

Action

Default value

WAN IP Address

Enter the static IP address.

0.0.0.0

WAN Subnet Mask

Enter a subnet mask.

0.0.0.0

•

Click on the

Next

button to continue configuring the remote network (WAN) in IPoA mode.

5 - Information / Configuration

Page 5-42

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

Field

Action

Default value

Enable IGMP Multicast

Check the box to activate the IGMP function.

Not checked

•

Click on the

Next

button to continue configuring the remote network (WAN) in IPoA mode.

•

Select a preferred wan interface as the system default gateway.

•

Click on the

Next

button to continue configuring the remote network (WAN) in IPoA mode.

5 - Information / Configuration

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Page 5-43

Sagem Communications SAS

document. Reproduction and disclosure prohibited

Field

Action

Default

value

Obtain DNS info from a

WAN interface

Check the box to obtain DNS server addresses

automatically, and select the desired interface in

the list

WAN Interface selected

.

Checked

Use the following Static

DNS IP address

If you check this box, you must enter DNS

server addresses.

Not

checked

Primary DNS server

Enter a primary DNS server address.

-

Secondary DNS server

Enter a secondary DNS server address.

-

•

Click on the

Next

button to continue configuring the remote network (WAN) in IPoA mode.

Field

Action

PORT / VPI / VCI

Displays the Port/VPI/VCI specific to the “IPoA” connection.

Connection Type

Displays the “IPoA” protocol.

Service Name

Displays the name of the service: ipoa_0_0_35.

Service Category

Displays the type of service adapted to the traffic required.

IP Address

Indicates the IP address entered.

Service State

Displays the status of the service:

Enabled

.

NAT

Displays the status of the NAT:

Enabled

.

Firewall

Displays the status of the firewall:

Enabled

.

IGMP Multicast

Displays the status of the IGMP function:

Disabled

.

Quality of Service

Displays the status of the Quality of Service function:

Disabled

.

•

Click on the

Apply/Save

button to confirm the new WAN service.

5 - Information / Configuration

Page 5-44

SAGEM F@st™ 1704 Reference Manual - 253272861-A

Sagem Communications SAS

document. Reproduction and disclosure prohibited

5.7.3

LAN

Object:

This is used to configure the IP parameters for the local network (LAN).

•

In the

Advanced Setup

menu, select

LAN

.

The following screen opens:

Field

Action

Default value

Groupname

Select the required group.

Default

IP Address

Enter the address of your local network.

192.168.1.1

Subnet Mask

Enter your network's subnet mask.

255.255.255.0

Enable IGMP Snooping

Check this box to activate the IGMP (

I

nternet

G

roup

M

anagement

P

rotocol) protocol. This

lets you manage the declarations of belonging

to one or more groups with Multicast routers.

Not checked

Standard Mode

14

Check the box if you wish the IGMP snooping

runs in normal mode (transparency with IGMP

frames).

Checked

Blocking Mode

14

Check the box if you wish the IGMP snooping

runs in blocking mode (interception and

removal of IGMP frames).

Not checked

Enable LAN side firewall

Check the box to activate the LAN side

firewall.

Not checked

14

These fields only appear when the “Enable IGMP Snooping” field is activated (box checked).