1. Home
    2. /
  2. Manuals
    3. /
  3. Rosewill
    4. /
  4. T600N
    5. /
  5. 16
Page 76 / 99 Scroll up to view Page 71 - 75
T600N - Wireless Dual Band Gigabit Router
76
CONFIGURATION GUIDE
Advanced
Advanced:
View and configure advanced system and network settings:
•
NAT:
Enable or disable Network Address Translation (NAT); You can also enable or disable the
Hardware accelerator here for optimal network performance.
•
Port Mapping:
Re-direct a range of service port numbers to a specified LAN IP address.
•
Port Forwarding:
Configure server applications to send and receive data from specific ports on
the network.
•
Port Triggering:
Configure applications that require multiple connections and different
inbound and outbound connections.
•
ALG:
Configure the application layer gateway (ALG).
•
UPnP:
Enable or disable Universal Plug and Play (UPnP) functionality.
•
QoS:
Configure the network quality of service (QoS) setting by prioritizing the uplink and
downlink bandwidth.
•
Routing:
Configure static routing.
Page 77 / 99
T600N - Wireless Dual Band Gigabit Router
77
CONFIGURATION GUIDE
NAT:
Network address translation (NAT) allows users on the LAN to access the
Internet through a single Public IP Address or multiple Public IP Addresses. NAT
provides firewall protection from hacker attacks and allows for mapping LAN IP
addresses to WAN IP addresses with key services such as websites, FTP, video
game servers, etc.
•
NAT:
Click
Enable
to activate the function.
Hardware Accelerator:
Hardware Accelerator will boost the network performance,
but QoS and bandwidth control will be disable.
•
Hardware Accelerator:
Click
Enable
to activate the function.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Advanced
–
NAT & Hardware Accelerator
Page 78 / 99
T600N - Wireless Dual Band Gigabit Router
78
CONFIGURATION GUIDE
Port Mapping:
Port Mapping allows you to redirect a particular range of service
port numbers from the WAN to a particular LAN IP address.
•
Enable Port Mapping:
Click to activate this function.
•
Description:
Enter a description of the device that you want to record
to the MAC Filtering table.
•
Local IP :
Enter the local IP address of the server behind the NAT
firewall
•
Protocol:
You can select Both, TCP, UDP here. They are internet packet
transmit methods, TCP are mainly for protocol that requires more detail
such as Email, while UDP are protocols that require less checkup such
as multimedia streaming.
•
Port Range:
Enter the range of ports to be forwarded.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Advanced
–
Port Mapping
Note:
Incorrectly changing these settings may cause the device to stop
function and some of your programs unable to access the internet. Please
make sure you know the effect before changing the settings
Click
Add
to save the settings to the table or
Reset
to discard the changes.
Page 79 / 99
T600N - Wireless Dual Band Gigabit Router
79
CONFIGURATION GUIDE
Port Forwarding:
Port forwarding enables multiple server applications on a LAN to
serve clients on a WAN over a single WAN IP address. The router accepts incoming
client packets, filters them based on the destination WAN, or public, port and
protocol and forwards the packets to the appropriate LAN, or local, port. Unlike the
DMZ feature, port forwarding protects LAN devices behind the firewall.
•
Enable Port Forwarding: Click Enable Port Forwarding to active port forwarding.
•
Description:
Enter notes or details about the forwarded port configuration.
•
Local IP:
Enter the local IP address of the server behind the NAT firewall.
•
Protocol:
Select the protocol to use for mapping from the following: TCP, UDP or
Both.
•
Local Port:
Enter the LAN port number that WAN client packets will be forward to.
•
Public Port:
Enter the WAN port number that clients will send their packets to.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Advanced
–
Port Forwarding
Click
Add
to save the settings to the table or
Reset
to discard the changes.
Page 80 / 99
T600N - Wireless Dual Band Gigabit Router
80
CONFIGURATION GUIDE
Port Triggering:
Some applications, such as online games, videoconferencing and
VoIP telephony, require multiple ports for inbound and outbound traffic. If an
application requires both an incoming and an outgoing port simultaneously, it is
possible to configure static port forwarding to handle the packets. That is not an
optimal solution because a static IP address must be configured for each device.
With port triggering an application, local port or range of ports and a
communication protocol can be mapped to a specific public port. Sending packets
out over the local port triggers the router to open an incoming local port that is
mapped to the same public port and application as the outgoing local port(s). The
local application can communicate over the incoming and outgoing ports without
the need for creating a fixed address.
•
Enable Port Triggering:
Click to activate the function.
•
Description
Enter notes or details about the port triggered configuration.
•
Popular Applications
Select a default application or add a new one.
•
Trigger Port
Enter the application’s outbound port
number(s).
•
Trigger Type
Select the protocol to use for port triggering from the
following: TCP, UDP or Both.
•
Public Port
Enter the inbound port(s) for the application in the following
format: 2300-2400 or 47624.
•
Public Type
Select the protocol to use for the inbound port from the
following: TCP, UDP or Both.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Advanced
–
Port Triggering

Rate

3.5 / 5 based on 2 votes.

Popular Rosewill Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top