Page 61 / 99 Scroll up to view Page 56 - 60
T600N - Wireless Dual Band Gigabit Router
61
CONFIGURATION GUIDE
Wireless 5G
Security
2
WEP
WEP (Wired Equivalent Privacy) :
SSID Selection:
Select the wireless network group to change the wireless
security settings for.
Authentication Type:
Select the type of authentication.
Open System:
Wireless stations can associate with the
T600N
without WEP encryption
Shared Key:
Devices must provide the corresponding WEP key(s)
when connecting to the T600N .
Auto
Key Length:
Select between 64-bit and 128-encryption.
Key Type:
Select the type of characters used for the WEP Key: ASCII (5
characters) or Hexadecimal (10 characters).
Encryption Key [#]:
Enter the encryption key(s) used to encrypt the data
packets during data transmission.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 62 / 99
T600N - Wireless Dual Band Gigabit Router
62
CONFIGURATION GUIDE
Wireless 5G
Security
3
WPA
WPA (Wi-Fi Protected Access) :
WPA Type:
Select the type of WPA.
WPA Temporal Key Integrity Protocol (TKIP):
Generates a 128-bit key
for each packet.
WPA2 Advanced Encryption Standard (AES):
Government standard
packet encryption which is stronger than TKIP.
WPA2 Mixed:
Mixed mode allows device to try WPA2 first, and if that
fails selects WPA type.
Pre-Shared Key Type:
Select the type of pre-shared key as Passphrase (ASCII)
or Hexadecimal.
Pre-Shared Key:
Enter the pre-shared Key value.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 63 / 99
T600N - Wireless Dual Band Gigabit Router
63
CONFIGURATION GUIDE
Wireless 5G
Security
4
WPA Radius
WPA Radius (Wi-Fi Protected Access) :
This encryption use a RADIUS server to
authenticate wireless stations and provide a session key to encrypt data during
communications. Most of the information should be provided by the Network
administrator.
WPA Type:
Select the type of WPA.
WPA Temporal Key Integrity Protocol (TKIP):
Generates a 128-bit key
for each packet.
WPA2 Advanced Encryption Standard (AES):
Government standard
packet encryption which is stronger than TKIP.
WPA2 Mixed:
Mixed mode allows device to try WPA2 first, and if that
fails selects WPA type.
RADIUS Server IP Address:
For entering the IP address of the server.
RADIUS Server Port:
For entering the port number of the server.
RADIUS Server Password:
For entering the password of the server.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 64 / 99
T600N - Wireless Dual Band Gigabit Router
64
CONFIGURATION GUIDE
Wireless 5G
Filter
Filter:
The filter function will allow you to control your wireless clients’
connection based on their MAC addresses.
Enable Wireless Access Control:
When “
Enable Wireless Access Control
” is
selected, only wireless clients with MAC addresses listed in the table are
allowed to connect to the wireless network. If you enable without adding any
client’s MAC address here, then T600N can only be access via wire cable.
Description:
Enter a description of the device allowed to connect to
the network.
MAC address:
Enter the MAC address of the wireless device.
MAC Address Filtering Table:
Showing the information on the Clients that
has MAC address recorded.
No.:
The sequence number of the device.
Description:
The description of the device.
MAC Address:
The MAC address of the device.
Select:
Indicates the device(s) that can have actions performed on
them.
Click
Add
to add new device in the table or
Reset
to discard the changes.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 65 / 99
T600N - Wireless Dual Band Gigabit Router
65
CONFIGURATION GUIDE
Wireless 5G
WPS
WPS :
Wi-Fi protected setup (WPS) is an easy way to allow wireless clients to
connect to the T600N. Automate the connection between the device and the
T600N using a button or a PIN #.
WPS:
Enable or disable WPS.
WPS Current Status:
A notification of whether or not wireless security is
configured.
Self Pin Code:
An 8-digit PIN which is required when configuring the router for
the first time in Windows 7 or Vista.
SSID:
Showing the name of the wireless network.
Authentication Mode:
The current security settings for the corresponding SSID.
Passphrase Key:
A randomly generated key created by the T600N during WPS.
WPS via Push Button:
Click
Start to Process
to activate WPS.
WPS via PIN:
Enter the PIN of a wireless device click
Start to Process
to
activate WPS.

Rate

3.5 / 5 based on 2 votes.

Popular Rosewill Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top