1. Home
    2. /
  2. Manuals
    3. /
  3. Rosewill
    4. /
  4. RNX-AC750RT

Rosewill RNX-AC750RT Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of Rosewill RNX-AC750RT router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 8
AC750 Wireless Dual Band Gigabit Router
RNX-AC750RT
Quick Installation Guide
Page 2 / 8
AC750 Wireless Dual Band Gigabit Router
RNX-AC750RT
Quick Installation Guidde
1. Hardware Connection
a.
Power off your modem and disconnect your existing router if you have one. (If
the modem has a backup battery, please remove it too.)
b.
Use an Ethernet cable to connect the
WAN
port of the router to the modem’s
LAN port.
c.
Use another Ethernet cable to connect your computer to one of the
LAN
port
labeled 1/2/3/4 on your router.
d. Turn on your modem and wait for 2 mintues. (Replace the battery if you
removed it previously.)
e.
Plug the supplied power adapter into the
POWER
jack, and then press the
ON/OFF
button to turn on the router and wait for 1 minute.
2. Router Configuration
To login to the router, you should set up the TCP/IP Protocol in "
Obtain an IP
address automatically
" mode on your PC(s). For the detailed instructions,
please refer to Appendix B in the
User Guide
on the
Resource CD
.
1)
To access the configuration utility, open a web-browser and type in the
default address
in the address field of the browser.
2)
After a moment, a login window will appear. Enter
admin
for the User Name
and Password, both in lower case letters. Then click
Login
or press Enter.
Page 3 / 8
AC750 Wireless Dual Band Gigabit Router
RNX-AC750RT
Quick Installation Guidde
3)
After successful login, you can configure the router using the web browser.
Please click the
Quick Setup
link on the left of the main menu and the Quick
Setup screen will appear. Click
Next
to continue.
4)
The
WAN Connection Type
screen will appear as shown below.
The router provides
Auto-Detect
function and supports five types of WAN
connection:
Dynamic IP
,
Static IP
,
PPPoE
,
L2TP
, and
PPTP
. It
’
s
recommended that you make use of the
Auto-Detect
function. If you are sure
of what kind of connection type your ISP provides, you can select the very
type and click
Next
to go on configuring.
5)
If you select
Auto-Detect
, the Router will automatically detect the
connection type your ISP provides. Make sure the cable is securely plugged
Page 4 / 8
AC750 Wireless Dual Band Gigabit Router
RNX-AC750RT
Quick Installation Guidde
into the WAN port before detection. The appropriate configuration page will
be displayed when an active Internet service is successfully detected by the
Router.
a) If the connection type detected is
Dynamic IP
, the MAC Clone page will
appear as shown below. In most cases, there is no need to clone the MAC
address. You can select “
No, I do NOT need to clone MAC address
” and
then click
Next
. If it is necessary in your case, please select
“
Yes, I need
to clone MAC address
”
and then click
Next
.
b)
If the connection type detected is
Static IP
, the next screen will appear as
shown below. Fill the blanks with the parameters provided by your ISP,
and then click
Next
.
c)
If the connection type detected is
PPPoE
, the next screen will appear as
shown below. Enter the
Username
and
Password
provided by your ISP,
and then click
Next
.
Page 5 / 8
AC750 Wireless Dual Band Gigabit Router
RNX-AC750RT
Quick Installation Guidde
d) If the connection type detected is
L2TP
, the next screen will appear as
shown below. Fill the blanks with the parameters provided by your ISP,
and then click
Next
.
Select
Static IP
if the IP Address/ Subnet Mask/ Gateway and DNS
server address have been provided by your ISP. Then please enter
server IP address or domain name provided by your ISP, and also enter
the corresponding parameters.
Select
Dynamic IP
if none of the above parameters are provided. Then
you just need to enter server IP address or domain name provided by
your ISP.
e) If the connection type detected is
PPTP
, the next screen will appear as
shown below. Fill the blanks with the parameters provided by your ISP,
and then click
Next
.

Rate

4 / 5 based on 1 vote.

Popular Rosewill Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top