Rosewill RNX-AC750RT Router Manual PDF (Setup & Configuration Guide)

Page 6 / 8 Scroll up to view Page 1 - 5

AC750 Wireless Dual Band Gigabit Router

RNX-AC750RT

Quick Installation Guidde

Select

Static IP

if the IP Address/ Subnet Mask/ Gateway and DNS

server address have been provided by your ISP. Then please enter

server IP address or domain name provided by your ISP, and also enter

the corresponding parameters.

Select

Dynamic IP

if none of the above parameters are provided. Then

you just need to enter server IP address or domain name provided by

your ISP.

6)

After you complete the above, the

Dual Band Selection

page will appear as

the following. Choose the frequency you want for your wireless network and

then click

Page 7 / 8

AC750 Wireless Dual Band Gigabit Router

RNX-AC750RT

Quick Installation Guidde

7)

Configure the basic parameters for 2.4GHz wireless network. You can

rename your 2.4GHz wireless network and create your own password in this

page. Then click

8)

Configure the basic parameters for 5GHz wireless network. You can rename

your 5GHz wireless network and create your own password in this page.

Then click

9)

Confirm the parameters and click the

Save

button to make the settings take

effect.

10) You will see the

Complete

page as shown below. Click the

Finish

button to

finish the Quick Setup.

Page 8 / 8

AC750 Wireless Dual Band Gigabit Router

RNX-AC750RT

Quick Installation Guidde

Appendix: Troubleshooting

1.

What can I do if I cannot open the web-based management page?

1)

Verify all the hardware connections. The computer should be connected to

the LAN port (yellow).

2)

Turn off the router and turn it back on.

3) Change another cable\web browser\computer.

4)

Check the IP settings of your computer, and ensure that it is set to "Obtain an

IP address automatically".

2.

What can I do if I forget my password?

1) For default wireless password:

Please refer to the “Wireless Password/PIN” labeled on the bottom of the

router.

2)

For the web management page password:

Reset the router first and then use the default username and password:

admin, admin.

3.

How do I restore my r

outer’s configuration to i

ts factory default

settings?

If your router does not work properly, you can reset it and then configure it again.

With the router powered on, press and hold the WPS/Reset button on the rear

panel for approximately 8 seconds before releasing it.

This equipment may be operated in all EU countries (and other countries

following the EU directive 1999/5/EC). Usage in the following countries might be

subject to restrictions: FR, IT, NO. See detail information in product

’

s document

of resource CD.

Rate

Popular Rosewill Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share