Page 46 / 99
Scroll up to view Page 41 - 45
T600N - Wireless Dual Band Gigabit Router
46
CONFIGURATION GUIDE
Wireless 2.4G
–
Security
–
1
Security:
Enable security options on the wireless network to prevent unwanted
connection to the wireless network.
•
SSID Selection:
Select the wireless network group to change the wireless
security settings for..
•
Broadcast SSID:
Enable or disable broadcast SSID. Choose whether or not the
wireless group is visible to other members.
•
Wi-Fi Multimedia (WMM):
Enable or disable Multimedia quality of server
(QoS) to optimize the streaming for bandwidth sensitive data such as HDTV
video streaming, online gaming, VoIP, videoconferencing, and etc.
•
Encryption:
Select the encrypt type for the router. You can select between
WEP, WPA (WPA TKIP/ WPA2 AES / WPA2 Mix), Pre-Shared Key, WPA Radius.
Please see next page for details on Encryption.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 47 / 99
T600N - Wireless Dual Band Gigabit Router
47
CONFIGURATION GUIDE
Wireless 2.4G
–
Security
–
2
–
WEP
WEP (Wired Equivalent Privacy) :
•
SSID Selection:
Select the wireless network group to change the wireless
security settings for.
•
Authentication Type:
Select the type of authentication.
•
Open System:
Wireless stations can associate with the
T600N
without WEP encryption
•
Shared Key:
Devices must provide the corresponding WEP key(s)
when connecting to the T600N .
•
Auto
•
Key Length:
Select between 64-bit and 128-encryption.
•
Key Type:
Select the type of characters used for the WEP Key: ASCII (5
characters) or Hexadecimal (10 characters).
•
Encryption Key [#]:
Enter the encryption key(s) used to encrypt the data
packets during data transmission.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 48 / 99
T600N - Wireless Dual Band Gigabit Router
48
CONFIGURATION GUIDE
Wireless 2.4G
–
Security
–
3
–
WPA
WPA (Wi-Fi Protected Access) :
•
WPA Type:
Select the type of WPA.
•
WPA Temporal Key Integrity Protocol (TKIP):
Generates a 128-bit key
for each packet.
•
WPA2 Advanced Encryption Standard (AES):
Government standard
packet encryption which is stronger than TKIP.
•
WPA2 Mixed:
Mixed mode allows device to try WPA2 first, and if that
fails selects WPA type.
•
Pre-Shared Key Type:
Select the type of pre-shared key as Passphrase (ASCII)
or Hexadecimal.
•
Pre-Shared Key:
Enter the pre-shared Key value.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 49 / 99
T600N - Wireless Dual Band Gigabit Router
49
CONFIGURATION GUIDE
Wireless 2.4G
–
Security
–
4
–
WPA Radius
WPA Radius (Wi-Fi Protected Access) :
This encryption use a RADIUS server to
authenticate wireless stations and provide a session key to encrypt data during
communications. Most of the information should be provided by the Network
administrator.
•
WPA Type:
Select the type of WPA.
•
WPA Temporal Key Integrity Protocol (TKIP):
Generates a 128-bit key
for each packet.
•
WPA2 Advanced Encryption Standard (AES):
Government standard
packet encryption which is stronger than TKIP.
•
WPA2 Mixed:
Mixed mode allows device to try WPA2 first, and if that
fails selects WPA type.
•
RADIUS Server IP Address:
For entering the IP address of the server.
•
RADIUS Server Port:
For entering the port number of the server.
•
RADIUS Server Password:
For entering the password of the server.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 50 / 99
T600N - Wireless Dual Band Gigabit Router
50
CONFIGURATION GUIDE
Wireless 2.4G
–
Filter
Filter:
The filter function will allow you to control your wireless clients’
connection based on their MAC addresses.
•
Enable Wireless Access Control:
When “
Enable Wireless Access Control
” is
selected, only wireless clients with MAC addresses listed in the table are
allowed to connect to the wireless network. If you enable without adding any
client’s MAC address here, then T600N can only be access via wire cable.
•
Description:
Enter a description of the device allowed to connect to
the network.
•
MAC address:
Enter the MAC address of the wireless device.
•
MAC Address Filtering Table:
Showing the information on the Clients that
has MAC address recorded.
•
No.:
The sequence number of the device.
•
Description:
The description of the device.
•
MAC Address:
The MAC address of the device.
•
Select:
Indicates the device(s) that can have actions performed on
them.
Click
Add
to add new device in the table or
Reset
to discard the changes.
Click
Apply
to save the settings or
Cancel
to discard the changes.
19216811.live