Page 36 / 99
Scroll up to view Page 31 - 35
T600N - Wireless Dual Band Gigabit Router
36
CONFIGURATION GUIDE
Internet
–
PPTP
–
1
PPTP:
The point-to-point tunneling protocol (PPTP) is used in association with
virtual private networks (VPNs). There a two parts to a PPTP connection: the
WAN interface settings and the PPTP settings.
•
WAN Interface Settings
–
Dynamic IP Address:
•
WAN Interface Type:
Select Dynamic IP Address to assign an IP
address provided by an ISP.
•
Hostname:
Enter the service name of an ISP (optional).
•
MAC address:
Enter the MAC address of the devices’ network
interface card (NIC) in the MAC address field and click Clone MAC.
•
WAN Interface Settings
–
Static IP Address:
•
WAN Interface Type:
Select Static IP Address to assign a specific IP
address for the router.
•
My IP Address:
Enter the custom IP address. Normally provided by
the ISP.
•
My Subnet Mask:
Enter the custom Subnet Mask. Normally provided
by the ISP.
•
Gateway IP Address:
Enter the custom gateway IP address. Normally
provided by the ISP.
Page 37 / 99
T600N - Wireless Dual Band Gigabit Router
37
CONFIGURATION GUIDE
Internet
–
PPTP
–
2
PPTP Settings:
•
User Name:
Enter the username assigned by your ISP.
•
Password:
Enter the password assigned by your ISP.
•
Service IP Address:
Enter the PPTP server IP address provided by your ISP.
•
Connection ID:
Enter the connection ID provided by your ISP (optional).
•
MTU:
Enter the maximum transmission unit (MTU). The MTU specifies the
largest packet size (Default: 1462) permitted for an internet transmission. The
MTU size can be set between 512 and 1492.
•
Type:
Configure the connection type between the router and the ISP. Choose
between Keep Connection, Automatic Connection or Manual Connection.
•
Idle Timeout:
Configure the maximum amount of time, in minutes, allowed
for inactive Internet connection. The Internet connection will be dropped
when the maximum idle time is reached. Valid values are between one and
one thousand.
DNS Server:
The DNS server translates a domain or website name into a
uniform resource locator (URL), or Internet address. There are two options to
choose from: From ISP or User-Defined. Select From ISP to retrieve the DNS
address value from the ISP; select User-Defined to assign a custom DNS server
address.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 38 / 99
T600N - Wireless Dual Band Gigabit Router
38
CONFIGURATION GUIDE
Internet
–
L2TP
–
1
L2TP:
The layer 2 tunneling protocol (L2TP) is used in association with virtual
private networks (VPNs). There a two parts to a L2TP connection: the WAN
interface settings and the L2TP settings.
•
WAN Interface Settings
–
Dynamic IP Address:
•
WAN Interface Type:
Select Dynamic IP Address to assign an IP
address provided by an ISP.
•
Hostname:
Enter the service name of an ISP (optional).
•
MAC address:
Enter the MAC address of the devices’ network
interface card (NIC) in the MAC address field and click Clone MAC.
•
WAN Interface Settings
–
Static IP Address:
•
WAN Interface Type:
Select Static IP Address to assign a specific IP
address for the router.
•
My IP Address:
Enter the custom IP address. Normally provided by
the ISP.
•
My Subnet Mask:
Enter the custom Subnet Mask. Normally provided
by the ISP.
•
Gateway IP Address:
Enter the custom gateway IP address. Normally
provided by the ISP.
Page 39 / 99
T600N - Wireless Dual Band Gigabit Router
39
CONFIGURATION GUIDE
Internet
–
L2TP
–
2
L2TP Settings:
•
Login:
Enter the username assigned by your ISP.
•
Password:
Enter the password assigned by your ISP.
•
Service IP Address:
Enter the L2TP server IP address provided by your ISP.
•
MTU:
Enter the maximum transmission unit (MTU). The MTU specifies the
largest packet size (Default: 1462) permitted for an internet transmission. The
MTU size can be set between 512 and 1492.
•
Type:
Configure the connection type between the router and the ISP. Choose
between Keep Connection, Automatic Connection or Manual Connection.
•
Idle Timeout:
Configure the maximum amount of time, in minutes, allowed
for inactive Internet connection. The Internet connection will be dropped
when the maximum idle time is reached. Valid values are between one and
one thousand.
Click
Apply
to save the settings or
Cancel
to discard the changes.
Page 40 / 99
T600N - Wireless Dual Band Gigabit Router
40
CONFIGURATION GUIDE
Wireless 2.4G
Wireless 2.4G:
View and edit settings for 2.4G wireless network connectivity:
•
Basic:
Configure the minimum settings required to setup a wireless network connection.
•
Advanced:
Configure the advanced network settings.
•
Security:
Configure the wireless network security settings.
•
Filter:
Configure a list of clients that are allowed to wirelessly connect to the network.
•
WPS:
Automate the connection between the a wireless device and the router using an 8-digit
PIN.
•
Client:
List View the 2.4G wireless devices currently connected to the network.
19216811.live