1. Home
    2. /
  2. Manuals
    3. /
  3. Rosewill
    4. /
  4. T600N
    5. /
  5. 6
Page 26 / 99 Scroll up to view Page 21 - 25
T600N - Wireless Dual Band Gigabit Router
26
CONFIGURATION GUIDE
System
–
Log
Log:
The logging service records and displays important system information and
activity on the network. The events will be store in the memory buffer which
older data will overwrite when the buffer is full.
•
Save:
Click to store data to a log file.
•
Clear:
Click to empty the log file.
•
Refresh:
Click to empty the log file and begin updating it with new data.
System
–
Monitor
Monitor:
View the display bandwidth usage for LAN and WLAN traffic.
Page 27 / 99
T600N - Wireless Dual Band Gigabit Router
27
CONFIGURATION GUIDE
Wizard
Wizard:
The Setup Wizard helps T600N in automatically detecting the connection to your ISP.
Please follow this steps in the Wizard to complete your Setting.
Page 28 / 99
T600N - Wireless Dual Band Gigabit Router
28
Setup Wizard
1.
After click twice on “
Next
” confirming to start on the Wizard setup
process, T600N will automatically detect your Connection from the
ISP. You will need to provide T600N the following information once
the connecting method was detected.
2.
T600N is able to detect Static IP, Dynamic IP, PPP over Ethernet, PPTP,
and L2TP connection methods.
•
PPPoE:
PPPoE requires you having the
User Name
and
Password
provided by your ISP. Normally happens when using
DSL connection.
•
Dynamic IP (DHCP):
DHCP does not require entering anything.
Usually happens when getting connection from an existing
internet Connection.
•
Static IP (Fixed):
Fixed requires you entering a set IP address,
Subnet Mask, Gateway IP Address, Primary DNS, and/or
Secondary DNS. These information will provided by your ISP
and normally happens when using Cable connection.
•
Manually Configuration
: If no WAN Connection was detected,
you will need to manually enter the necessary information to
connect to your ISP. You may want to check the cable
connection and
Rescan
.
Wizard
–
Modem to LAN Setup
CONFIGURATION GUIDE
Page 29 / 99
T600N - Wireless Dual Band Gigabit Router
29
Setup Wizard Guide
1.
Once the setup for Modem to LAN complete, you will continue to set
up the Wireless
configuration.
2.
The Wizard will start with
2.4G WLAN Configuration
, then
5G WLAN
Configuration
:
•
2.4G WLAN Configuration:
•
There are 5 levels of Wireless Encryption you can set.
From the lowest security level to the highest level’s
WPA2 PSK. Please follow the instruction in the window
to set you SSID and password Key.
•
5G WLAN Configuration:
•
There are 5 levels of Wireless Encryption you can set.
From the lowest security level to the highest level’s
WPA2 PSK. Please follow the instruction in the window
to set you SSID and password Key.
Wizard
–
Wireless Setup
5 Security Levels for Wireless Encryption
CONFIGURATION GUIDE
Page 30 / 99
T600N - Wireless Dual Band Gigabit Router
30
Setup Wizard
1.
Once the setup complete, you will see a summary window show up
tells you to
Reboot
the Router’s System to make all changes
effective.
2.
The Reboot process will take 45 seconds.
3.
After the Reboot process , the Status window of the T600N will
popup.
Admin Password Changes
1.
When you finish the Wizard setup, please click on “
Tools
” on the
left hand side’s menu to change the default Password for login into
your T600N from “
admin
” to your desired Password.
2.
Please write down this password somewhere and keep
it for your
future use.
3.
This is very important because the default password may be an easy
access for people who wants to hack into your network.
Wizard
–
Setup Successfully
CONFIGURATION GUIDE

Rate

3.5 / 5 based on 2 votes.

Popular Rosewill Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top